Sometimes it returned an usererror(), sometimes Start() failed.
Now it always fails on Start(), so nothing else has to check again
what blitter is used.
AfterBlitterChange() can never change to a 0bpp, so it is sufficient
to guard this with an assert().
Additionally, tell exactly why the font failed to load, which
glyph was missing from the font. This hopefully helps the user
a bit more in the right direction.
This makes no sense, that a free-wagon-chain could be larger than
the maximum length of a train, as you cannot put an engine in
front of that anyway. And it prevents run-away AIs making very
silly long free-wagon-chains.
The current "restart" command is now called "reload", as that is
what it does.
The old "restart" command is now called "restart", as that is what
it did.
As this has not been in any official release yet, this shouldn't
harm any kitten.
For non-NewGRF planes, "count" is never above 1. So planes can
smoothly be guided to their destination. For NewGRF planes, they
can go as quick as "count" values of 20. This easily overshoots
the target. So, calculate if the plane will overshoot, and start
nudging him to the destination earlier. You won't notice this
either way, as it all happens within a single tick.
Although meant as a funny joke towards the player, our social
standards have changed since 2004, and such "jokes" are no
longer acceptable by the community as a whole.
The only value of the message is that people are informed the
information is stored in the savegame. This is mostly useful for
us, developers, as some of those cheats can have side-effects
which people report.
While at it, styled the GUI a bit better, as the way the text
was presented was odd.
korean: 2 changes by telk5093
finnish: 2 changes by hpiirai
dutch: 49 changes by Afoklala
spanish: 16 changes by Luis45ccs
french: 7 changes by dimensi0n
polish: 2 changes by yazalo
This change allows a user to see what is available and what will become
available before it is available, instead of only disabling the button
with no further explanation. It also always allows building roads and
canals, even if no vehicles are available for road / water.
For rail/road/tram, a dropdown with available types is shown. If
none are available, it reads "None". If the type is not yet available,
it is greyed out.
For dock/airport, this always open the toolbar, but building airports,
docks, and depots buttons are disabled till vehicles are available
for those.
Road is the only exception, with the primary road always being
available. Here too, stations and depots are disabled till vehicles
become available. It does mean you can now always build roads to
for example help towns grow.
Before it was shown as a normal order, but the vehicle was skipping
it. This was rather unclear to the user. Now it is red and contains
text with some hints what is going on.
The text is prefixed rather than post-fixed, as we have many
post-fixes already.
This reverts commit c1fddb9a6a and 639cfa43d2.
access_mode "none" is only supported by GCC11, but introduced
after it branched. So there are GCC11.0s out there that do not
support it. We will have to wait for GCC11.1 to hit before we
can re-add this.
Because certain files are read-only, the "restore-cache" step
fails, as Windows tar refuses to overwrite those files (even
if they are identical). Instead of hoping upstream fixes
"restore-cache", just remove the read-only flag on these files
instead.
Without hills, not all industries can be generated, which means
that with a default configuration you get errors. This is far from
optimal, of course.
This now forces that there is at least some hills, even when you
are using very-flat. This is a stopgap solution, but a proper
solution requires a full rewrite of the terrain generator, which
is not a 2 minute (or even 2 week) job.
To make sure flat is still flat-ish, reduce the default
snow-line-height to 10, making it look a lot better on smaller maps.
This is a compromise between being able to have flat maps and
still having all industries on arctic.
This means that for rail tunnel/bridges, the rail is first sold,
and the tunnel/bridge is destroyed after. This means destroying
tunnels/ bridges now often makes you money, instead of costing.
Similar, with road/tram tracks. Destroying a road+tram
tunnel/bridge now costs the same amount of money as first
removing the tram tracks and than destroying the road
tunnel/bridge. Especially as tram tracks generate money when
removing, this is a noticeable difference.
It only considered the end-tile (or start-tile) for the bridge,
instead of both. This is obvious in the rest of the code which
constantly does "+ 2"; this being the only place that does a "+ 1".
Despite what it looked like, you could never really change the
ending-year (it was always reset to 2050 on start-up). See commit
683b65ee1 for details. As a side-effect, the variable that was
suppose to store the ending-year was just zero, never containing
a real ending-year.
MAX_YEAR is set to 5000000, but having an ending-year set to the
same meant you could bypass this, and play till the uint32 wrapped.
The game can either show highscore or wrap year, not both. When
you would do both, every year you get the highscore dialog.
By changing the maximum value of ending-year to 4999999 we prevent
this issue.
spanish (mexican): 5 changes by absay
korean: 5 changes by telk5093
finnish: 5 changes by hpiirai
latvian: 14 changes by lexuslatvia
spanish: 23 changes by SeveralCircles, 10 changes by Luis45ccs
polish: 5 changes by yazalo
The selected group was not reset when drag&drop was aborted. When
after that vehicle drag&drop was successful, group drag&drop code
was still executed, causing weird behaviour or even crashes.
When a multi-tile house is rebuild, it always used the most northern
tile to build the new house. This can very easily lead to houses
wandering off in the north-ish direction (either NW or NE).
To prevent this, pick the tile closest to town center when rebuilding
on a multi-tile house. This still means a house can be build away
from a road, but it is no longer wandering around finding another
town to call home.
This is a much better location for this button, as you send
money from one company to another company, not from player
to player.
This is based on work done by JGRPP in:
f820543391
and surrounding commits, which took the work from estys:
https://www.tt-forums.net/viewtopic.php?p=1183311#p1183311
We did modify it to fix several bugs and clean up the code while
here anyway.
The callback was removed, as it meant a modified client could
prevent anyone from seeing money was transfered. The message
is now generated in the command itself, making that impossible.
When a vehicle is cleaned up, all news that points to the news is
also removed. This was a bit evil, as it would also remove any
news related to crashed, acting like the crash never happened.
This left players a bit in the dark what was going on exactly.
This means that if you start OpenTTD with "-c" to indicate another
location to store files, it can still read the content you already
downloaded from your PERSONAL_DIR. This folder is, however,
read-only.
This is useful for situations where you downloaded OpenGFX via
the content-service, but want to run the regression or want to
run with a clean configuration. With this change, you no longer
need to download OpenGFX again.
When running with -dsl=2 it is very easy to miss important information
as there was a lot of noise in between too. This tunes the debug
levels a bit to be less noisy while keeping the important bits.
The previous fix 887e9481ff0e70df6bf93ce15a3899a03f124c50 only worked for roads and failed to consider a multiplier used for the infrastructure totals for tunnels/bridges.
Also, depots and bus/truck stops are counted as 2 road pieces on creation but were only counted as 1 road piece on conversion because the function DiagDirToRoadBits() was used, which only ever returns single-piece road segments.
Co-authored-by: A. S <admin-git@sotai.tk>
We use CMakeListsTxtAdvanced, and as such, we have to do this our
self via "-DCMAKE_BUILD_TYPE=RelWithDebInfo". Otherwise we are
producing Debug builds instead of Release builds. Oops.
Also parts of the saveload code does, and some other places. This
does slow down builds, but for most computers this will not be
measurable. At least, the ones I had access to I could not find
a difference in FPS, mainly as that is heavily limited by the Hz
of the screens of the computer.
Either way, it is better to have a full functional game than a
fast one in my opinion
You can do: "startai myai.3", which starts version 3 of "myai".
This is very useful for testing save/load code between different
versions of your AI.
However, when using this syntax, the AI got saved as "myai.3" as
name of the AI, instead of "myai". This caused several problems,
like indicating to the user the AI could not be found, but still
load the AI. But in all cases, the AI never got the chance to
load the saved data, making the whole reason this exists pointless.
By splitting the name and version already in the console command,
the code becomes simpler and AIs started this way now follow the
normal flow after initialization.
It was rather confusing that "library_name" was calculated, and
then not used to do the FindLibrary() call. Flipping those two
blocks around makes it a bit more sane to read.
When link graph jobs are cleared due to abandoning the game or exiting,
flag the job as aborted.
The link graph job running in a separate thread checks the aborted flag
periodically and terminates processing early if set.
This reduces the delay at game abandon or exit if a long-running job
would otherwise still be running.
Check if the job is still running two date fract ticks before it is due
to join, and if so pause the game until its done.
When loading a game, check if the game would block immediately due to
a job which is scheduled to be joined within two date fract ticks,
and if so pause the game until its done.
This avoids the main thread being blocked on a thread join, which appears
to the user as if the game is unresponsive, as the UI does not repaint
and cannot be interacted with.
Show if pause is due to link graph job in status bar, update network
messages.
This does not apply for network clients.
Various of PatchPacks (Spring 2013, Joker, ChillPP) used versions
slightly higher than ours. Of course, as time went by, this
caught up with us, and we are now almost pushing a new version
that would conflict with them. To avoid users creating unneeded
issues about "why can I not load my savegame", lets be ahead of
the curve and flat-out refuse to load them.
Version-wise, this is totally fine. We have ~32k versions to go
before we run out (0x8000 is masked by JGRPP; we should avoid
using that). At the rate we bump savegames, this is not going to
happen in any sane reality.
Azure Pipelines has build our releases for two years now, but we
are finally switching to GitHub Actions. This to bring the full
workflow to a single place, making it easier for people to see
what is going on and how to influence the process.
This has several ways of being triggered:
- When creating a new release via the GitHub interface. Fully
automated that will produce new binaries, upload them, and it
will even update the website to tell about the new version.
- When triggered in an automated way from OpenTTD/workflows to
start a nightly.
- Manually via the Release workflow, which accepts branches,
Pull Requests and tags to build.
Rerunning a job is safe and should be without issues. Everything
retriggers and updates what-ever might have been broken. In fact,
except for dates, it should produce identical results.
Co-authored-by: Charles Pigott <charlespigott@googlemail.com>
DOS did not have cases in filenames. Different OS interpret
them as either all-lowercase or all-uppercase. So we try both.
All-uppercase is done by the obg/obm/obs files, and if opening
fails, OpenTTD will automatically retry the all-lowercase variant.
So for those who already have the files lowercase, nothing
changes. For those that install fresh from TTO, it should now
work out-of-the-box.
Apple Clang version 12 (bundled with Xcode 12) complaints about copying
small objects in range loop (-Wrange-loop-analysis introduced by -Wall).
This warning can be easily avoided by removing the reference from
the const pointer type.
This means that for NE/NW, it should have one more in case of
freeform-edges, and in case of SE/SW it should have one less.
Reminder: freeform-edges only adds VOID tiles on X=0 and Y=0.
This is for consistency; most other objects add a # to indicate
it is the Nth of that object, except for Trains / RVs / Ships /
Aircrafts.
This becomes painfully apparent with unnamed vehicles in groups,
which do get a "#".
When a developer attaches the "preview" label, a build is created
and published on https://preview.openttd.org/. After that, new
pushes to the PR are automatically build (as long as the "preview"
label exists).
If a non-developer attaches the "preview" label, it will be
removed.
This mode doesn't wrap the mouse constantly, but requests SDL
to lock the mouse pointer. This is needed, as with Emscripten
you are not allowed to change the mouse poisition (only to lock
it into place).
Emscripten compiles to WASM, which can be loaded via
HTML / JavaScript. This allows you to play OpenTTD inside a
browser.
Co-authored-by: milek7 <me@milek7.pl>
This commit prepares for the next commit, as Emscripten needs to
have a way to trigger a single iteration of the main loop. To
keep the real changes more clear, this commit only unrolls the
loop, and makes no changes to the logic itself.
With \x, we sometimes had to do the "" trick, as the length is not
predefined. With C++11 bringing \u to the specs, which has a preset
length, we no longer need the "" trick.
We set the strings to u8, to ensure all compilers use UTF-8 encoding
for the \u characters.
This was triggered by newer CLangs, which start to warn if you
use "" in the middle of a string, wondering if that was your
intention. It is a good question. And this is our answer :)
On Windows, relative folders don't work so well. So we need to
lookup the full path. This is best done in DetermineBasePaths()
and as a bonus that only sets SP_WORKING_DIR once.
Also, while at it, make it more like the upcoming release-workflow,
so they look a lot more similar.
Functional it should be the same, except that Windows should
now also output when a test fails.
Basically, with '-c' you now create a sandbox. It will still use
your personal-dir and global-dir to find files you installed there,
but all new files are stored with a base folder identical to the
folder the configuration is in.
This is a bit of an old bug, that we many have tried to solve in
various of different ways. The code has grown sufficiently complex
that it is hard to see what consequences of actions are. This is
in my opinion the most harmless solution, while increasing the
usefulness of the '-c' flag.
In essence, the problem was that empty folders were always created
in the directory where the configuration was, but as that directory
wasn't added to any searchpath, files weren't stored there, unless
by accident it was a folder already on the searchpath. For example,
if you do './openttd -c local.cfg', it did work as expected. But
in the more generic variant, it did not.
With this patch, you can run './openttd -c /new/folder/local.cfg',
and it will create and prepare that folder to receive new files.
'content_download' is also stored in the directory the
configuration is in; this was already the case. Important to
note that there is only one search-path for 'content_download'.
In other words, when using '-c', it will not look in '~/.openttd'
inside the 'content_download' folder.
This was just weird. With XDG _personal_dir was created already,
but later on it was checked if it was different from config_dir,
and the creation was skipped. All this checking and validation
makes my head spin .. let's make it a bit more simple.
Formally it was only done on exit. This means that if it crashes
changes in settings were not stored. This is often rather
frustrating. Additionally, targets (like emscripten) where people
are unlike to use "Exit Game", will never see their configuration
stored.
The drawback is that on every setting change there is some minor
I/O of writing the ini file to disk again.
If I explicitly tell the system I do not want sound, I still get
presented a nice message I do not have any BaseSounds available
on my system, and that I should download one to enjoy sound. Well,
let me tell you, with "-snull" that is really really not going to
help. So please, be quiet, and let me enjoy the game without
"boooooo" and "DING DING DING".
Thank you.
The intention of this function was that you could download
everything after a filter was applied; but this never really
took off. Instead, a select few people used this functionality
to download every available package on BaNaNaS. This is not in
the spirit of this service. Additionally, these few people were
good for 70% of the consumed bandwidth of BaNaNaS.
LZO was used before the first version we track in our version
control system, which dates back to Aug 2004. Somewhere before
that time a few savegames / scenarios exist which use LZO. No
other savegame / scenario does since then. Let's not encourage
people to install something that ancient.
There are no scenarios on BaNaNaS that require LZO.
This is, by specs, undefined behaviour. See
https://reviews.llvm.org/D67122
In cases where this is done, optimizations done by LLVM can
generate code that causes crashes.
GetVariableAddress() had two (legit) ways this could happen:
- For SaveLoad set to global
- For SaveLoad set to SLE_VAR_NULL, where sld->address is always
a nullptr, and object could or could not be a nullptr.
By default gzip embeds a timestamps which makes building it twice
not reproducible, passing -n skips this embedding behaviour.
Motivation: https://reproducible-builds.org
italian: 1 change by AlphaJack
romanian: 13 changes by ALEX11BR
finnish: 6 changes by VeeraKoo
slovak: 202 changes by FuryPapaya
spanish: 240 changes by MontyMontana
When the restart command is issued, a normal map is always spawned.
This improvement takes into account the current state of _file_to_saveload to check if a savegame/scenario/heightmap was previously loaded, and loads the same resource again.
The expected regression output files all end with a newline. As such, we have to make sure we capture the output from OpenTTD with the last newline intact.
When compiling with '-Og', GCC warns about variables that are
initialized by reference in the condition of a 'while' loop.
This commit silences the warning by explicitly initializing the
variables in question to their respective 'invalid value' markers,
which will most likely be optimized out when the compiler realizes
the values are never used.
This changes the error when you attempt to convert a road owned by a town to another road, specifying that it's owned by the town rather than simply being incompatible. As the original poster of the issue pointed out, these seemed to be the only occurences of the incompatible road string, so now it's unused, but they would be left untouched in case of future use or since changing it to a different error would do the work of removing it then. If requested, it likely wouldn't be too difficult to remove the string entirely.
I tried building a tag, and got this error:
CMake Error at cmake/scripts/FindVersion.cmake:85 (string):
string sub-command REGEX, mode REPLACE: regex "^[0-9.]*$" matched an empty
string.
In 11ab3c4e the number of cargo types was changed from 32 to 64.
The save/load of Town::cargo_accepted was not updated, such that
only half of the data structure is saved/loaded in savegame versions
199 to 218.
Discard and regenerate data from all savegame versions prior to 219.
In 63ccb36e BaseConsist::name was changed from a malloced char*
to a std::string.
OrderBackup inherits from BaseConsist.
The saveload of OrderBackup::name was not updated.
Remove static buffer form of NetworkAddress::GetAddressAsString.
This is used in multiple threads concurrently, and is not thread-safe.
Replace it with a form returning std::string.
This fixes a bug that can reproduced with these steps:
* Start openttd in fullscreen mode
* Turn off fullscreen mode
* Try to resize the window. The window can't be resized.
CPack works closely together with CMake to do the right thing in
terms of bundling (called 'package'). This generates all the
packaging we need, and some more.
CMake works on all our supported platforms, like MSVC, Mingw, GCC,
Clang, and many more. It allows for a single way of doing things,
so no longer we need shell scripts and vbs scripts to work on all
our supported platforms.
Additionally, CMake allows to generate project files for like MSVC,
KDevelop, etc.
This heavily reduces the lines of code we need to support multiple
platforms from a project perspective.
Addtiionally, this heavily improves our detection of libraries, etc.
For grfs, it now uses CMake scripts to do its job, and both grf
files are split into their own folder to make more clear what is
going on. Additionally, it no longer builds in-source (although the
resulting grf is copied back in the source folder).
For ob[msg] it now uses CMake scripts to generate the translation
files; the result is no longer stored in-source (but in the build
folder).
Although all files are available to create the GRFs and basesets, it
won't really work till CMake is introduced (which will happen in a
few commits from here)
The tst_stationlist savegame had to be changed to start the correct
AI. In the old setup, all regression AIs had the same name, which
made it impossible to run both regressions in parallel. With the new
setup this is possible.
Although all files are available to run the regression, it won't
really work till CMake is introduced (which will happen in a few
commits from here)
Initialization code for GRFFile::roadtype_map was copied from
railtype_map. But while RailType is a byte-sized enum and could thus
be initialized via memset, RoadType doesn't have a defined size.
Previously the internal content list was invalidated and sorted for
every new item added. Now the sorting is delayed until the GUI is
drawn, which means we only sort once per GUI tick.
Since the amount of incoming items per GUI tick is not controlled by
the GUI but rather by network speed, we were previously doing a lot
of duplicate work per tick, causing the mouse cursor to lag while
the list was initialized.
Allow more direct player-initiated interaction for Game Scripts, by letting the GS put push-buttons on storybook pages. These buttons can either trigger an immediate event, or require the player to first select a tile on the map, or a vehicle.
Additionally this reworks how the storybook pages are layouted and rendered, to allow for slightly more complex layouts, and maybe speeding drawing up a bit.
The presence of sdl2-config is used go determine whether to look for
sdl2 first, or just sdl1. However, when sdl2-config is *not* present,
`which` returns an empty string. Due to lack of quoting, this produces
`[ -x ]`, rather than `[ -x "" ]` and it turns out the former actually
has a succesful exit status for some reason.
This was not a problem when just running configure, because it would
then just fail to detect sdl2 and fall back to sdl1. However, when
passing `--with-sdl` (without specifying a version), this would only
attempt to detect sdl2, even when sdl2-config was not present, but sdl1
is.
Adding quotes makes the check work as intended.
Variable-length values would write threshold values with a byte too many.
System Exclusive messages would cause write to fail since the end byte was treated as part of next message.
Point out that translations should be fixed via the web translator.
Clerify that "changed NewGRFs" means after the game was started, not that any game using NewGRFs is invalid for bug reports.
Use DC_AUTOREPLACE for actions that shall be reversibe, in this case:
- Do not rearrange free wagons in test-run.
- Do not discard OrderBackups.
The latter was not triggered by actual auto-replace, since it does not set a 'user'.
Since the move to C++11, building for pre 10.7 is not possible with the native
Apple tools. Also, due to bitrot, the file doesn't even compile anymore. While
this could be fixed, it shows that this subdriver is basically never used anymore.
Since the C++11 move, getting OpenTTD to compile and run for anything
below 10.7 basically requires building a custom compiler and libc++.
Also, the QuickDraw subdriver crashes on more modern OSX version. While this
is fixable, keeping the driver around is probably pointless.
This commit adds the missing feature of allowing the server owner to
provide a reason for kicking/banning a client, which the client sees in
a pop-up window after being kicked. The implementation extends the
network protocol by adding a new network action called
NETWORK_ACTION_KICKED that is capable of having an error string, unlike
the other network error packages. Additionally, the kick function
broadcasts a message to all clients about the kicked client and the
reason for the kick.
This caused drawing areas larger than 2097151 pixels at 8x zoom to
not be subdivided into smaller chunks as required.
This resulted in pathological performance issues in the sprite sorter.
The original algorithm pays intermediate legs in feeder systems based
on the start and end stations of that particular leg.
This tends to result in large negative payments on the final leg for
journeys with many feeder legs, as the overall feeder payment increases
with the number of legs, and the final leg is penalised for discrepancies
between the previous leg payments and the actual payment for delivery
from the source to the destination.
The feeder share setting is a partial mitigation, however it is difficult
to tune as a suitable value depends on the number of legs and the network
topology, which are often not the same for all vehicles.
The new incremental algorithm pays the cargo payment from the source
station to the end station of the current leg, minus any previous
transfer feeder payments for each leg.
This prevents unbounded increase of feeder payments and therefore avoids
the issue of excessive negative payments on the final leg.
Feeder payments may be negative, e.g. in the case of poorly performing
or highly indirect legs. This is better than penalising the final leg.
This mode reduces the need to tune the feeder shares setting to the
current network.
The feeder share setting applies in the existing way.
'date -u' returns the time in UTC. 'git log' uses local time. In
result, when a machine is on for example +0100, it would generate
the changelog of 7 days 1 hour, instead of 7 days. This is a silly
oversight.
SDL_GetVideoDriver(0) returns name of first video driver included in
the library, not the driver currently used.
SDL_GetCurrentVideoDriver() does what we want here.
* Feature: GS method to allow company to use an engine before its introduction date
* Feature: GS method to retire an engine early for a specific company
If the game was started loading a savegame or scenario, auto-restart will load a new random map.
This is inconsistent with the case in which a heightmap was loaded, as in that case the heightmap is kept as a basis for a new game.
This proposal solves this heterogeneity be considering the originally loaded resource shall be kept, hence savegames & scenarios shall be reloaded
MCF Dijkstra iterations are executed for all source nodes in a round-robin order.
Source nodes typically require different numbers of MCF Dijkstra iterations
to satisfy all of their demand.
This change is to avoid performing MCF Dijkstra iterations on source nodes which
have already been fully satisfied.
In the case where multiple industries have the same name, sorting
in the industry directory window is non-deterministic.
This results in the order changing on each re-sort, and is noticeable
when the industries have different production or transported values.
Added missing keycodes mapping to `_keycode_to_name` array
to allow their use in `hotkeys.cfg`.
Also reordered them according to `WindowKeyCodes` order.
Signed-off-by: Konstantin Gribov <grossws@gmail.com>
Ensure the same coordinates are used for station/town/player signs regardless of how the landscape changes below it after the coordinates were first determined.
By keeping track of whether each ViewportSign is valid for Kdtree use (and only ever registering the viewport sign when the object is valid) a lot of code can be simplified and become more robust at the same time.
This fixes part A of #7619, but not part B.
Vehicle::x_pos and Vehicle::y_pos are not required to be within the map bounds.
See also: GetTileHeightBelowAircraft()
On TileLoop_Object, HQs are able to produce and move passengers and mail to stations, but querying the HQ tiles for cargo supplied was returning nothing. This makes it so that they return +1 to both passengers and mail.
Previously, a helicopter in the hangar of a commuter airport would have to wait until HELIPAD2 was free before it could takeoff. Now, a helicopter in the hangar can takeoff from just outside the hangar.
This function requires libSDL 2.0.5 or higher. It looks like we don't
need to use it, and can just use the original SDL_CreateRGBSurface(),
with the masks set to 0, to trigger the default 8-bit format, which is
SDL_PIXELFORMAT_INDEX8.
Closes #7785
Note: this code path is activated by using an 8-bit blitter, like:
./bin/openttd -b 8bpp-simple
This is a quick fix by @KeldorKatarn:
65e656b9d6
It has the drawback that snow is draw to the inside the depots as well, as the removed comment suggests.
Prior to this commit, the following is observed when running openttd.exe
that was compiled using mingw32 on x86_64:
> The procedure entry point ScriptBreak could not be located in the
dynamic link library GDI32.dll
The MSDN docs at the below link state that modules using Uniscribe must
first link against usp10 before gdi32 to avoid this issue:
https://msdn.microsoft.com/en-us/library/windows/desktop/dd319118(v=vs.85).aspx
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Fixes the following complaints:
src/network/core/address.cpp: In member function 'const sockaddr_storage* NetworkAddress::GetAddress()':
src/network/core/address.cpp:134:55: error: 'AI_ADDRCONFIG' was not declared in this scope
this->Resolve(this->address.ss_family, SOCK_STREAM, AI_ADDRCONFIG, nullptr, ResolveLoopProc);
Signed-off-by: Joe Stringer <joe@wand.net.nz>
src/depend/depend.cpp: In constructor 'File::File(const char*)':
src/depend/depend.cpp:170:19: error: 'strdup' was not declared in this scope
this->dirname = strdup(filename);
^~~~~~
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Fix the following compile errors:
In file included from openttd/src/debug.h:15:0,
from openttd/src/string.cpp:13:
openttd/src/cpu.h:35:19: error: 'uint' was not declared in this scope
bool HasCPUIDFlag(uint type, uint index, uint bit);
openttd/src/string.cpp: In function 'char* strcasestr(const char*, const char*)':
openttd/src/string.cpp:548:7: error: 'strncasecmp' was not declared in this scope
if (strncasecmp(haystack, needle, needle_len) == 0) return const_cast<char *>(haystack);
openttd/src/strgen/strgen_base.cpp: In function 'void EmitPlural(Buffer*, char*, int)':
openttd/src/core/alloc_func.hpp:136:6: error: 'alloca' was not declared in this scope
(T*)alloca((num_elements) * sizeof(T)))
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Multiplayer games has the server add some flags to the cmd value during the handling.
These flags should not be included in the verification, mask them out. Without this
masking out, scripts tend to die when executing their first command in multiplayer.
If $ROOT_DIR is a linked working tree from git-worktree(1), then
$ROOT_DIR/.git is a regular file instead of a directory. Allow this
when deciding whether to use git to detect OpenTTD's version.
Drop checks for svn and hg in config.lib, because findversion.sh
hasn't used svn nor hg since 192770e6da.
The AllRules ruleset causes the VS 2019 editor to litter warning squiggles all over the place, about things that would never be fixed. Limit it to the smallest ruleset available. Warnings shown now mainly concern potential arithmetic overflows.
The 'offs_start_map' is a 'SmallMap', so its own 'Erase' function should be called instead of the underlying vector's 'erase' function.
And fix a "typo". :)
Building with FreeType is still possible and will take precedence over the GDI renderer, but
the project files don't include FreeType anymore by default. Combining GDI rendering with ICU
text layout is untested.
This can avoid out-of-memory situations due to single scripts using up the entire address space.
Instead, scripts that go above the maximum are killed.
The maximum is default 1 GB per script, but can be configured by a setting.
When drag and drop a vehicle into an empty slot in the vehicle group window it tries to create the new group as the subgroup of the first group (GroupID = 0). This is failing if the dragged vehicle's type is different than the first group's vehicle type.
Road type and rail type are stored in separate locations, so this parameter does
not make make sense as it is only used for rail bridges. Instead explicitly set the
rail type in MakeRailBridgeRamp().
AIs test station catchment in reverse to how players see station catchment.
This did not take account of non-rectangular station catchment areas, so AIs
could end up placing stations in locations that did not accept/deliver cargo.
In particular this crash can be observed when using the
bootstrap GUI to download the base graphics.
In ClientNetworkContentSocketHandler::OnReceiveContentInfo
ClientNetworkContentSocketHandler::callbacks is iterated, using an iterator
cb->OnReceiveContentInfo() is called (cb is of type BootstrapAskForDownloadWindow)
This calls new BootstrapContentDownloadStatusWindow()
This inherits from BaseNetworkContentDownloadStatusWindow
The constructor of which calls _network_content_client.AddCallback(this)
This reallocates the std::vector which is being iterated in ClientNetworkContentSocketHandler::OnReceiveContentInfo
This results in iter being invalid, and an assertion failure occurs shortly
afterwards due to its use in the next iteration of cb->OnReceiveContentInfo()
Adjust all locations where ClientNetworkContentSocketHandler::callbacks
is iterated to avoid problematic behaviour
The last use was for storing a list of memory blocks. As the way these lists are accessed is very
specific, it is easier to just write an explicit destructor instead of trying to exactly match the behaviour.
DropDownListItem are strongly managed using std::unique_ptr to ensure leak-free handling. Appropriate use
of move-semantics make intent a lot clearer than parameter comments and allows the compiler to generate
copy-free code for most situations.
A conforming compiler with a valid <mutex>-header is expected.
Most parts of the code assume that locking a mutex will never fail unexpectedly,
which is generally true on all common platforms that don't just pretend to
be C++11. The use of condition variables in driver code is checked.
It is skipped when NPF is in use.
It is trivial to work around by adding and removing dummy orders.
It is mostly alleviated by the ship path cache in YAPF.
In the autoreplace window, the rail type drop down is for choosing engines
of the given time. Many rail types do not have engines specifically designed for them,
and are merely compatible with other rail types. This list is thus unwieldy and many
options have no engines available.
As this drop down is for choosing _engine_ rail type rather than compatible rail types,
we can list just the rail types explicitly listed by engines.
Linkgraph nodes require a specific order that was maintained by swapping just the last
element for the node to be removed. std::vector::erase() changed this to removing the
node is then shuffling the remain items down, which upsets other references to this
indices.
This is fixed by switching back to the original swap & pop method.
Display of industry production around tiles (as shown when placing a station)
did not take account of the station catchment changes, so still showed production
from an industry even if it was not covered by a tile.
This is fixed by making a set of nearby industries that are covered, instead of
looping over all possible industries.
finnish: 2 changes by hpiirai
english (us): 17 changes by Supercheese
luxembourgish: 10 changes by Phreeze
dutch: 20 changes by JanWillem
norwegian (bokmal): 2 changes by Leifbk
latin: 16 changes by Supercheese
portuguese: 3 changes by JayCity
The use of std::none_of in network/core/host.cpp is driven by the non-const
comparison operator use by NetworkAddress. A future commit should address
the const_casts in that class to ensure const-correctness.
The public and protected interface to SmallVector are unchanged
SmallVector now requires that items be default constructible
This isn't an issue since some contained items were previously created
uninitialized.
Temporary default constructors are added to the following structs
- SmallPair
- SmallStackItem
- GRFPresence
Where vector<bool> is required, transition immediately to std::vector
to avoid returning proxy object references.
Sign width was only updated when the text was changed. This seems to work for player-placed
signs as there is always a rename operation, however AIs can create a sign with text in one
go, in which case the width was never set.
finnish: 12 changes by hpiirai
greek: 40 changes by Jubilee
luxembourgish: 2 changes by Phreeze
dutch: 12 changes by JanWillem
french: 4 changes by romazoon
norwegian (bokmal): 12 changes by Leifbk
hungarian: 14 changes by Brumi
portuguese: 51 changes by JayCity, 11 changes by vesgo
This is a C++11 feature that allows the compiler to check that a virtual
member declaration overrides a base-class member with the same signature.
Also src/blitter/32bpp_anim_sse4.hpp +38 is no longer erroneously marked
as virtual despite being a template.
Measurement tooltip was auto-closed as the hover/right-click test for tooltips was not
satisfied in this case. This is fixed by keeping the tooltip visible and instead explicitly
closing the tooltip when the PlaceObject is cancelled/completed.
This switch has been a pain for years. Often disabling broke
compilation, as no developer compiles OpenTTD without, neither do
any of our official binaries.
Additionaly, it has grown so hugely in our codebase, that it
clearly shows that the current solution was a poor one. 350+
instances of "#ifdef ENABLE_NETWORK" were in the code, of which
only ~30 in the networking code itself. The rest were all around
the code to do the right thing, from GUI to NewGRF.
A more proper solution would be to stub all the functions, and
make sure the rest of the code can simply assume network is
available. This was also partially done, and most variables were
correct if networking was disabled. Despite that, often the #ifdefs
were still used.
With the recent removal of DOS, there is also no platform anymore
which we support where networking isn't working out-of-the-box.
All in all, it is time to remove the ENABLE_NETWORK switch. No
replacement is planned, but if you feel we really need this option,
we welcome any Pull Request which implements this in a way that
doesn't crawl through the code like this diff shows we used to.
In 10 years there was no active development on DOS. Although it
turned out to still work, the FPS was very bad. There is little
interest in the current community to look into this.
Further more, we like to switch to c++11 functions for threads,
which are not implemented by DJGPP, the only current compiler
for DOS.
Additionally, DOS is the only platform which does not support
networking. It is the reason we have tons of #ifdefs to support
disabling networking.
By removing DOS support, we can both use c++11 functions for threads,
and remove all the code related to disabling network. Sadly, this
means we have to see DOS go.
Of course, if you feel up for the task, simply revert this commit,
and implement stub c++11 functions for threads and stub functions
for networking. We are more than happy to accept such Pull Request.
GetAircraftFlightLevel<Aircraft> is only used in static functions
inside aircraft_cmd.cpp. With GCC, Clang and MSVC this is not an
issue, but on ICC fails linking, because it doesn't find this
version of this template. Possibly these two pieces of information
are linked.
Explicit defining the function fixes the issue.
It is only an error if the invalid result is actually used. This will be silently ignored at the moment.
It is still an error if a duplicate cargo type is returned.
Currently this can only be triggered by NewGRF house tiles querying for cargo acceptance history
of nearby stations (var 0x64) with a tile offset, and providing an offset that happens to point
to an industry tile. This serves no useful purpose.
_current_company is not currently logged anywhere in the crashlog.
_local_company is logged, despite being much less useful than
_current_company.
This change logs _current_company alongside _local_company.
If it was compiled with MingW, both / and \ were accepted as
path separator. On MSVC, only \ was. This is an unexpected
difference between binaries for the same platform. Remove this
discrepancy by accepting both / and \ on all platforms.
config.lib happens to set GLOBAL_DATA_DIR in case it is not DOS
and not OS2, but this kind of deduction is annoying to maintain.
It is better to just check if the define you want to use is set,
and leave it to config.lib to set it or not depending on the OS.
By naming it in a different way, things get a bit confusing.
Especially if we are switching to CMake, which autodetects these
things, we need to use the name the authors of ICU gave it; not
our interpertation of that name.
By naming it in a different way, things get a bit confusing.
Especially if we are switching to CMake, which autodetects these
things, we need to use the name the authors of ICU gave it; not
our interpertation of that name.
It is the only library we use that calls itself with 'lib' in the
name. This might be confusing, but with the arrival of cmake a lot
of these things are automated. And detection will find 'liblzma',
not 'lzma', like with 'lzo', 'zlib', ..
This change is a controlled by a game setting, located under Environment ->
Industries which allows toggling the behaviour. It defaults to enabled.
"Company stations can serve industries with attached neutral stations"
When enabled, industries with attached neutral station (such as Oil Rigs) may
also be served by company-owned stations built nearby. This is the traditional
behaviour.
When disabled, these industries may only be served by their neutral station.
Any nearby company-owned stations won't be able to serve them, nor will the
neutral station serve anything else other than the industry.
libtimidity was introduced with the support for PSP. PSP has been
dropped almost a year ago, but this music driver was not. This
corrects that oversight.
timidity (via extmidi) still works fine. This purely removes the
libtimidity support, which was only really available for PSP.
In 10 years there is no commit to change how BeOS works, and we
have no active maintainer for it. It is unlikely it works in its
current state (but not impossible).
With the arrival of SDL2 (and removal of SDL), BeOS is no longer
support. SDL2 suggests to use Haiku instead of BeOS.
In 10 years there is no commit to change how MorphOS works, and we
have no active maintainer for it. It is unlikely it works in its
current state (but not impossible).
With the arrival of SDL2 (and removal of SDL), MorphOS is no longer
support. There is an SDL2 port for MorphOS, but it is not maintained
by upstream SDL2, and nobody can currently test it out.
If anyone wants to re-add MorphOS, please do (revert this patch,
fix the problems, and create a Pull Request). If you need any help
doing so, let us know! It is not that we don't like MorphOS, it is
that we don't have anyone fixing the problems :(
Introduce a new default algorithm for town cargo generation (passengers and mail), and a game setting to choose between the new and original algorithm.
The original town cargo generation algorithm has the property of the generated amount relating to the square of each building's population, meaning large towns easily produce more cargo than can realistically be transported. The problem is excessive cargo is amplified if playing with cargodist.
The new algorithm introduced instead has a linear relation to the population. The result is that smaller towns will produce slightly more cargo, while the largest towns will produce about a fourth of what they would with the original algorithm.
Existing savegames will use the original algorithm, while new games will default to the new algorithm.
finnish: 39 changes by hpiirai
french: 4 changes by glx
hungarian: 4 changes by Brumi
russian: 3 changes by Lone_Wolf
korean: 20 changes by telk5093
croatian: 5 changes by VoyagerOne
This only affects failed town generation, as towns do not delete bridges under any other circumstances.
The existing test performed badly with a large number of towns due to having to calculate the
nearest town, and also by its nature assumed a bridge was built by the nearest town, leading
to bridges of nearby large towns be removed incorrectly.
If we gain the ability to quickly retrieve the correct town (which is _not_ the nearest town) from the bridge, this change should be reviewed.
Group names are visual identifiers, and do not need to be unique.
Group sorting already falls back to group ID if names are the same, so that sorted
list position is stable.
When replacing an airport with another, cancel current orders of type 'go to depot' from aircraft still heading to it if the rebuilt airport doesn't have a hangar (helicopter vs heliport), or if the airplane can't land on the rebuilt airport (airplane vs helistation).
Removes 'go to hangar' orders from all aircraft when replacing an airport with hangar with another without hangar (heliport).
OpenTTD sources are still written in a way to work down to OSX 10.4 or so, as long as you can obtain a C++11 capable compiler. 10.9 is the minimal useful C++11 target using only Apple stuff out-of-the-box.
This is not an exact fix as previously, the wait time was speed/acceleration dependant. This simple fix ignores that and just makes the 'days' from the settings comment to be actually days.
Previously, if a train had been ordered to reverse, and while it was slowing down, was
ordered to travel to a depot that is behind it, the train would continue forwards.
Also when a train had been ordered to reverse, and while it was slowing down, was
ordered to travel to a depot that is in front of it, the train would not cancel the
reversal.
In both cases the train would travel away from the target depot.
Trains in this situation now behave correctly and will travel towards the depot.
When unpacking downloaded content, the downloaded .gz file was being opened with `fopen`, the OS file handle given to zlib, and then afterwards zlib told to close the file.
But the `FILE *` object was never closed with `fclose`, meaning the stdio library would have a hanging file object, whose file handle was now invalid or referred to a different file. This caused asserts during shutdown with Microsoft's C library in debug mode.
Fix this by properly duplicating the OS handle and `fclose`ing the `FILE *` object, before giving the handle to zlib.
croatian: 4 changes by VoyagerOne
korean: 4 changes by telk5093
russian: 2 changes by Lone_Wolf
german: 4 changes by smwforever45, 4 changes by ShadowCop
spanish (mexican): 2 changes by Absay
portuguese: 52 changes by vesgo
finnish: 3 changes by hpiirai
dutch: 238 changes by JanWillem
estonian: 1 change by rm87
Allow multiple AIs to possibly start in the same tick.
start_date = 0 becomes a special case, where random deviation does not occur.
If start_date was not already 0, then a minimum value of 1 must apply.
Simplify how list position is determined by using existing functions.
Also rename livery_height -> rows and SetLiveryHeight() -> SetRows(), as height implies pixels.
swedish: 36 changes by Joel_A
spanish: 3 changes by SilverSurferZzZ
russian: 2 changes by Lone_Wolf
romanian: 18 changes by kneekoo
portuguese: 37 changes by vesgo
* Change: Replace checkbox in livery selection window with Default option in drop down selection.
This reduces clutter in the UI and allows for primary/secondary colours to independently follow the default scheme if desired.
* Feature: Add vehicle group liveries.
Many of these town names were using the 'a with ~ above it' character,
which should actually by 'a with u above it'. There were other missing
accents as well which I've added.
With language set to German, there was a problem in this dialog box due
to the long strings in this language. It looks like the call to
`GetStringHeight()` here is using `r.top` to help calculate the
max width, rather than `r.left`.
Use an implementation of the Cohen-Sutherland line-clipping algorithm.
The previous algorithm had an excessive false-positive rate.
Line-rendering is sufficiently expensive that using a line-clipping
algorithm with a much lower false-positive rate is a net performance
benefit.
belarusian: 1 change by translators
norwegian (nynorsk): 1 change by translators
chinese (simplified): 1 change by translators
serbian: 1 change by translators
czech: 1 change by translators
esperanto: 1 change by translators
chinese (traditional): 1 change by translators
portuguese (brazilian): 1 change by translators
norwegian (bokmal): 1 change by translators
swedish: 1 change by translators
lithuanian: 1 change by translators
hebrew: 1 change by translators
croatian: 1 change by translators
bulgarian: 1 change by translators
catalan: 1 change by translators
afrikaans: 1 change by translators
vietnamese: 1 change by translators
slovenian: 1 change by translators
faroese: 1 change by translators
thai: 1 change by translators
frisian: 1 change by translators
scottish gaelic: 1 change by translators
persian: 1 change by translators
korean: 1 change by translators
greek: 1 change by translators
latin: 1 change by translators
welsh: 1 change by translators
galician: 1 change by translators
japanese: 1 change by translators
english (au): 1 change by translators
italian: 6 changes by lorenzodv, 1 change by translators
urdu: 1 change by translators
french: 7 changes by glx
malay: 1 change by translators
tamil: 1 change by translators
spanish: 4 changes by SilverSurferZzZ, 1 change by translators
slovak: 1 change by translators
basque: 1 change by translators
polish: 1 change by translators
indonesian: 1 change by translators
arabic (egypt): 1 change by translators
russian: 2 changes by Lone_Wolf, 1 change by translators
hungarian: 1 change by translators
luxembourgish: 1 change by translators
romanian: 1 change by translators
irish: 1 change by translators
latvian: 1 change by translators
german: 1 change by translators
danish: 1 change by translators
spanish (mexican): 7 changes by Absay
icelandic: 1 change by translators
english (us): 1 change by translators
turkish: 1 change by translators
portuguese: 1 change by translators
ukrainian: 1 change by translators
finnish: 1 change by translators
dutch: 1 change by translators
estonian: 1 change by translators
When manually skipping to a 'go to hangar' order in the order list, while the aircraft is flying, direct the aircraft to the correct location of the hangar.
I've replaced some of the duplicate real town names with new real town
names in the French and Slovak sets.
Also, some Slovak town names were missing accents, so I've fixed those.
Stale bot checks if an issue hasn't had any attention in the last
60 days, or if a pull request hasn't had any attention in the last
30 days. If so, it marks it as stale. After 7 more days, it closes
the issue/pull request. Any activity on the issue/pull request
resets the timer.
This helps keeping the counter low, and the work manageable. There
is a lot of reasoning behind this idea, and other projects show it
really helps to keep the issue/pull request count low.
More information here: https://github.com/probot/stale
This is remove per-pixel overheads due to use of the SetPixel virtual
method.
These overheads included:
* expensive virtual method call which prevents inlining
* palette lookup for every pixel
* branch on whether palette animation is enabled on every pixel
Regenerate project files.
New Action0 property 23 for feature 07, variable length, format B n*(B B). Initial byte is number of structures following. First byte in structure is cargo id, second is acceptance level in 1/8 units.
Change the window to use a dynamically generated string of cargoes,
instead of one of a few fixed-length lists. With up to 16 cargoes
on each list, having 16 with the only difference how many are listed
seems like a bad maintenance idea.
This release pipeline creates all the official release binaries,
and publishes them as artifacts. Currently it can only produce
nightlies and custom builds; stable/testing release binaries are
untested.
This commit also splits up the pipeline in small bits, to both
improve readability, and to share code with the CI pipeline where
possible.
It turns out that Azure Pipelines has a lot of issues downloading
an artifact from your own project if it is triggered from a fork.
From what I could deduce, this is because the API requires a valid
token, which is not set (correctly?) when triggered from a fork.
As it is nicer anyway to publish the Windows Dependencies on GitHub,
it is now published there (and updated at least every week), and
we use the files from GitHub as our dependency.
Converted "tabs" to "spaces", changed the order based on the numbering of bugs, made that lines end closer to the 80th character column, changed "Mac OS X" to "macOS", and several other less important changes.
Fix by checking only for stations owned by the current company when
inspecting if there are multiple adjoining stations to the one being built.
When building next to 2 or more owned stations we don't know which
station should be extended. For other companies' stations that's not a
problem since our station won't merge with theirs anyway.
Calling to BuildStationPart should never have another company's station
as a parameter to attach to unless the client is malicious, so just returning
a generic error in that case.
Microsoft Visual C++ 2015 Update 3 (and possibly other versions) consider a struct member undefined in a
static_assert in the struct body. Moving the static_assert to a member function solves the issue.
When zooming out with a high res display, there can be about 150k sprites
to be sorted before displaying. With the O(n^2) complexity of the sprite
sorter, this can take several seconds.
This patch works around this by sorting the sprites by the xmin coordinate
first using QSort, which later allows an early bailout out of the inner
loop. This is enough to cut down the full unzoom time on a 4k display to a
fraction of second.
These meddling kids dared to play with magic, but the ancients texts
weren't ready for that.
Refactors logic to estimate costs that dated to even before OpenTTD 0.1;
Frame rate and various game loop/graphics timing measurements and graphs. Accessible via the Help menu, and can print some stats in the console via the fps command.
This is necessary to be compatible with some Game Scripts that might trigger compatibility modes if the SVN revision part is wrong. Potentially some NewGRFs might also be affected.
See for example [SuperLib's Helper class](https://dev.openttdcoop.org/projects/superlib/repository/entry/helper.nut#L280), containing this function:
function _SuperLib_Helper::HasWorldGenBug()
{
local version = _SuperLib_Helper.GetOpenTTDVersion();
if (version.Major == 0 || (version.Major == 1 && version.Minor <= 3)) {
return version.Revision < 25339;
} else {
return version.Revision < 25305;
}
}
If this function sees a Revision value of zero, it might trigger a workaround not required, causing a regression in scripts dependent on this. The MinimalGS example, for one, will trigger this.
This is to improve the usability of the window.
The two-letter abbreviations are not always clear, in particular
when using a large number of cargoes.
The company colours can be ambiguous when there are a large
number of companies.
Rewrite of almost the entire music control logic to a more modern style, hopefully also easier to understand. The old playlist handling made it look like arcane magic, which it doesn't have to be.
- Playlists are now stored in std::vector of objects instead of arrays of bytes with magic sentinel values, that need to be rotated around all the time. Position in playlist is stored as a simple index.
- The theme song is now reserved for the title screen, it doesn't play on any of the standard playlists, but is still available for use on custom playlists.
- When the player enters/leaves the game from the main menu, the music always restarts.
- Playback state (playing or not) is kept even if music becomes unavailable due to an empty playlist (or an empty music set), so it can restart immediately if music becomes available again.
- The shuffle algorithm was changed to a standard Fisher-Yates.
- Possibly better behavior when editing a custom playlist while it's playing.
- Custom playlists should be compatible.
- Framework for supporting custom playlists with songs from multiple music sets.
Select foreground colour depending on the brightness of the background.
Previously all cargo labels were rendered using black text, even
the background cargo colour was dark/black.
As an example: FIRS coal was black text on a black background.
Changed HTTP links to HTTPS, fixed some links to articles on OpenTTD Wiki, added Windows 10 and 8.1 to info section about path structure in these OSes, removed some
unnecessary whitespaces (and added several others), and some other less important changes.
Strictly speaking, calling memcpy with src as a nullptr is undefined behaviour
and the optimiser is entitled to delete any null ptr checks which occur afterwards.
This removes the warning emitted by UndefinedBehaviorSantizer.
Uniscribe is sometimes producing different results compared to ICU, especially
when RTL and LTR content is mixed. Comparing the results to other programs
(like editors or web browsers) leads me to believe that the result are at least
not worse than ICU and possibly better.
For Bus and Road stations only, if you are in demolish mode and click on the station
without releasing the button. Then you cancel demolish mode with R key.
Finally you release the mouse button. The station was demolished, instead of being built.
The demolish mode was not checked when mouse up event occured.
The array is rail type sized in terms of number of elements.
Each element should be a unsigned integer, not a rail type itself.
This fixes runtime warnings reported by UndefinedBehaviorSanitizer.
* Codechange: Check for scrollwheel_scrolling first when scrolling viewport instead of first setting normal values and then overwriting them.
* Fix #6558: [OSX] Reset 2D scrolling values when not scrolling to prevent unintended window focus changes
* Change: [OSX] Include initial scrolling movement when using 2D scrolling to make it more responsive
* Fix: [OSX] 2D scrolling not working when setting viewport scroll behaviour to use left mouse button
Create a new blitter mode: 32bpp-sse2-anim, which is 32bpp-anim + this.
32bpp-sse2-anim is now used by default where 32bpp-anim would have been.
Also use this with the 32bpp-sse4-anim blitter.
See issue #6469.
Some songs (at least one in OpenMSX) use the MIDI pitch bend range controllers
but don't reset these at the end. This causes all subsequent songs to sound
wrong.
MCI MIDI is poorly supported on newer versions of Windows and can cause large
delays at the beginning of tracks.
The new driver is based on a from-scratch reader for Standard MIDI Files. This
should be re-usable in other music drivers too, and can allow for finer control
of playback in general.
It also provides a better framework for reading MIDI data from other formats
than just SMF.
Tested with various languages and GUI font sizes, should look good everywhere.
Also clamps near-end values to minimum and maximum so 0 and 127 are possible to achieve even on small GUI sizes (like the default.)
We do a memset of (byte - byte), which strictly seen ranges from -254 .. 255, for which GCC warns.
But just before this memset is an if() which says the first byte has to be bigger than the second.
So this is a bogus warning.
You can open the folder (as a CMake project). CMake will be detected, and you can compile from there.
Alternatively, you can create a MSVC project file via CMake. For this
either download CMake from https://cmake.org/download/ or use the version
that comes with vcpkg. After that, you can run something similar to this:
```powershell
mkdirbuild
cd build
cmake.exe..-G'Visual Studio 16 2019'-DCMAKE_TOOLCHAIN_FILE="<location of vcpkg>\vcpkg\scripts\buildsystems\vcpkg.cmake"-DVCPKG_TARGET_TRIPLET="x64-windows-static"
```
Change `<location of vcpkg>` to where you have installed vcpkg. After this
in the build folder are MSVC project files. MSVC can rebuild the project
files himself via the `ZERO_CHECK` project.
## All other platforms
```bash
mkdir build
cd build
cmake ..
make
```
For more information on how to use CMake (including how to make Release builds),
we urge you to read [their excellent manual](https://cmake.org/cmake/help/latest/guide/user-interaction/index.html).
## Supported compilers
Every compiler that is supported by CMake and supports C++17, should be
able to compile OpenTTD. As the exact list of compilers changes constantly,
we refer to the compiler manual to see if it supports C++17, and to CMake
to see if it supports your compiler.
## Compilation of base sets
To recompile the extra graphics needed to play with the original Transport
Tycoon Deluxe graphics you need GRFCodec (which includes NFORenum) as well.
Looking to contribute something to OpenTTD? **Here's how you can help.**
Please take a moment to review this document in order to make the contribution process easy and effective for everyone involved.
Following these guidelines helps to communicate that you respect the time of the developers managing and developing this open source project.
In return, they should reciprocate that respect in addressing your issue or assessing patches and features.
## Using the issue tracker
The [issue tracker](https://github.com/OpenTTD/OpenTTD/issues) is the preferred channel for [bug reports](#bug-reports), but please respect the following restrictions:
* Please **do not** use the issue tracker for help playing or using OpenTTD.
Please try [irc](https://wiki.openttd.org/en/Development/IRC%20channel), or the [forums](https://www.tt-forums.net/)
* Please **do not** derail or troll issues. Keep the discussion on topic and respect the opinions of others.
* Please **do not** post comments consisting solely of "+1" or ":thumbsup:".
Use [GitHub's "reactions" feature](https://github.com/blog/2119-add-reactions-to-pull-requests-issues-and-comments) instead.
We reserve the right to delete comments which violate this rule.
* Please **do not** open issues or pull requests regarding add-on content in NewGRF, GameScripts, AIs, etc.
These are created by third-parties. Please try [irc](https://wiki.openttd.org/en/Development/IRC%20channel) or the [forums](https://www.tt-forums.net/) to discuss these.
* Please use [the web translator](https://translator.openttd.org/) to submit corrections and improvements to translations of the game.
## Bug reports
A bug is a _demonstrable problem_ that is caused by the code in the repository.
Good bug reports are extremely helpful, so thanks!
Guidelines for bug reports:
0. Please don't report issues with games where you changed NewGRFs mid-game. (This can be verified with the `gamelog` console command in-game.)
1. Please don't report issues with modified versions of OpenTTD (patchpacks, unofficial ports, and similar).
2.**Use the GitHub issue search** — check if the issue has already been
reported.
3.**Check if the issue has been fixed** — try to reproduce it using the latest `nightly` build of OpenTTD, available from https://www.openttd.org
4.**Isolate the problem** — ideally create reproducible steps with an attached savegame and screenshots. Try to use few or no NewGRFs, AIs etc if possible.
A good bug report shouldn't leave others needing to chase you up for more information.
Please try to be as detailed as possible in your report.
* What is your environment?
* What steps will reproduce the issue?
* Which operating system(s) experience the problem?
* What would you expect to be the outcome?
All these details will help people to fix any potential bugs.
Example:
> Short and descriptive example bug report title
>
> A summary of the issue and the OS environment in which it occurs. If
> suitable, include the steps required to reproduce the bug.
>
> 1. This is the first step
> 2. This is the second step
> 3. Further steps, etc.
>
> Attached savegame
> Attached screenshots showing the issue
> Crashlogs if the bug causes a crash
>
> Any other information you want to share that is relevant to the issue being
> reported. This might include the lines of code that you have identified as
> causing the bug, and potential solutions (and your opinions on their
> merits).
## Feature requests
Before opening a feature request, please take a moment to find out whether your idea fits with the [scope and goals](./CONTRIBUTING.md#project-goals) of the project.
It's up to *you* to make a strong case to convince the project's developers of the merits of this feature.
Please provide as much detail and context as possible.
This means don't request for a solution, but describe the problem you see and how/why you think it should be fixed.
For feature request we have a strict policy.
Keeping issues around with "a good idea" or "not really a bug but we should maybe fix it" turns out to have the reversed effect: nobody looks at it anymore.
Although we really appreciate feedback and ideas, we will close feature requests that we don't expect to fulfill in the next year.
Many of those ideas etc do have a place on the [forums](https://www.tt-forums.net); and if enough people like it, someone will stand up and make it.
It's usually best discuss in [irc](https://wiki.openttd.org/en/Development/IRC%20channel) before opening a feature request or working on a large feature in a fork.
Discussion in irc can take time, but it can be productive and avoid disappointment :)
## Pull requests
Good pull requests—patches, improvements, new features—are a fantastic help.
Pull requests should fit with the [goals of the project](./CONTRIBUTING.md#project-goals).
**Please do ask first** before embarking on any significant pull request (e.g. implementing features, refactoring code, porting to a different language), otherwise you risk spending a lot of time working on something that the project's developers might not want to merge into the project.
Every pull request should have a clear scope, with no unrelated commits.
[Code style](https://wiki.openttd.org/en/Development/Coding%20style) must be complied with for pull requests to be accepted; this also includes [commit message format](https://wiki.openttd.org/en/Development/Coding%20style#commit-message).
Adhering to the following process is the best way to get your work included in the project:
1. [Fork](https://help.github.com/fork-a-repo/) the project, clone your fork, and configure the remotes:
4. Commit your changes in logical chunks. Please adhere to these [git commit message guidelines](https://wiki.openttd.org/en/Development/Coding%20style#commit-message) or your code is unlikely to be merged into the main project.
Use Git's [interactive rebase](https://help.github.com/articles/interactive-rebase) feature to tidy up your commits before making them public.
5. Locally rebase the upstream development branch into your topic branch:
```bash
git fetch upstream
git rebase upstream/master
```
6. Push your topic branch up to your fork the first time:
7. [Open a Pull Request](https://help.github.com/articles/using-pull-requests/) with a clear title and description against the `master` branch.
**IMPORTANT**: By submitting a pull request or patch, you agree to the [License](#license) and the [Privacy Notice](CONTRIBUTING.md#privacy-notice).
### Pull request validation
Continuous integration (CI) tools monitor pull requests, and help us identify build and code quality issues.
The results of the CI tests will show on your pull request.
By clicking on Details you can further zoom in; in case of a failure it will show you why it failed.
In case of success it will report how awesome you were.
Tip: [commit message format](https://wiki.openttd.org/en/Development/Coding%20style#commit-message) is a common reason for pull requests to fail validation.
### Are there any development docs?
There is no single source for OpenTTD development docs. It's a complex project with a long history, and multiple APIs.
A good entry point is [Development](https://wiki.openttd.org/en/Development/) on the OpenTTD wiki; this provides links to wiki documentation and other sources.
The GitHub repo also includes some non-comprehensive documentation in [/docs](./docs).
You may also want the guide to [compiling OpenTTD](./COMPILING.md).
## Project goals
### What are the goals of the official branch?
The main goals of the official branch are:
- Stay faithful to the original gameplay from Transport Tycoon Deluxe
- Improve the user interface
- Allow extending the gameplay with add-ons / mods via supported content APIs
- Provide a (relatively) stable core for both players of the official branch, and for authors of add-ons and maintainers of patchpacks
In contrast, extending or altering the gameplay of the base game is not encouraged.
The rationale behind these goals is that people have different opinions about what OpenTTD is and what it should be.
When it comes to gameplay, there are at least these groups of people:
- *Model railway (mostly singleplayer)*: build "realistic" landscapes, roleplay a world, or even replicate historical scenarios
- *Economical challenge (mostly singleplayer)*: run a business with economical challenges
- *Transport challenge (singleplayer or cooperative multiplayer)*: build efficient track layouts with high cargo throughput and tons of vehicles
- *Competitive speed run (competitive multiplayer)*: maximize some goal in some limited amount of time
When it comes to gameplay features there are at least these groups of interests:
- *Control freak:* micromanagement like conditional orders, refitting and loading etc.
- *Casual:* automatisation like cargodist, path based signalling etc.
To please everyone, the official branch tries to stay close to the original gameplay; after all, that is what everyone brought here.
The preferred method to alter and extent the gameplay is via add-ons like NewGRF and GameScripts.
For a long time, the official branch was also open to features which could be enabled/disabled, but the corner-cases that came with some configurations have rendered some parts of the code very complicated.
Today, new features have to work with all the already existing features, which is not only challenging in corner cases, but also requires spending considerable more work than just "making it work in the game mode that I play".
The preferred method to introduce new gameplay features is to extend the content APIs, supporting ever more add-on content / mods.
This moves conflict-solving away from the codebase to content authors / players.
It is more accepted for add-ons not working together than the base game not working with certain setting combinations.
In general the game should allow anything that doesn't violate basic rules, but it should warn players if they take potentially dangerous or "stupid" actions.
For example, players are not prevented from starting vehicles without orders, but will receive a warning about vehicles having too few orders.
This lack of limitation has led to players challenging themselves to create networks where all vehicles have no orders, increasing gameplay possibilities.
### I do not agree with the goals of the official branch, what can I do instead?
Fork! There is a rich history of experimental patches for OpenTTD.
Many of these will never be accepted for core, but are creative and interesting ways to modify OpenTTD.
Sometimes patches are combined into long-running patchpacks, modified OpenTTD versions which can be downloaded by anyone, or modified OpenTTD clients for dedicated multiplayer servers.
One of the reasons to keep core relatively stable is to make life easier for patch authors and patchpack maintainers where possible.
Patchpack discussions and related topics may be found in community sites such as [TT-Forums development section](https://www.tt-forums.net/viewforum.php?f=33).
## Legal stuff
### License
By contributing your code, you agree to license your contribution under the [GPL v2](https://github.com/OpenTTD/OpenTTD/blob/master/COPYING.md).
### Privacy Notice
We would like to make you aware that contributing to OpenTTD via git will permanently store the name and email address you provide as well as the actual changes and the time and date you made it inside git's version history.
This is inevitable, because it is a main feature of git.
If you are concerned about your privacy, we strongly recommend to use "Anonymous <anonymous@openttd.org>" as the git commit author. We might refuse anonymous contributions if malicious intent is suspected.
Please note that the contributor identity, once given, is used for copyright verification and to provide proof should a malicious commit be made.
As such, the [EU GDPR](https://www.eugdpr.org/key-changes.html) "right to be forgotten" does not apply, as this is an overriding legitimate interest.
Please also note that your commit is public and as such will potentially be processed by many third-parties.
Git's distributed nature makes it impossible to track where exactly your commit, and thus your personal data, will be stored and be processed.
If you would not like to accept this risk, please do either commit anonymously or refrain from contributing to the OpenTTD project.
### Attribution of this Contributing Guide
This contributing guide is adapted from [Bootstrap](https://github.com/twbs/bootstrap/blob/master/CONTRIBUTING.md) under the [Creative Commons Attribution 3.0 Unported License](https://github.com/twbs/bootstrap/blob/master/docs/LICENSE) terms for Bootstrap documentation.
The GDPR notice is adapted from [rsyslog](https://github.com/rsyslog/rsyslog/blob/master/CONTRIBUTING.md) under the [GNU General Public License](https://github.com/rsyslog/rsyslog/blob/master/COPYING).
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
#
# Creation of bundles
#
# The revision is needed for the bundle name and creating an OSX application bundle.
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
#
# Building requires GRFCodec.
#
# Recent versions (including sources) can be found at:
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
STRGEN= !!STRGEN!!
ENDIAN_CHECK= !!ENDIAN_CHECK!!
SRC_DIR= !!SRC_DIR!!
LANG_DIR= !!LANG_DIR!!
BIN_DIR= !!BIN_DIR!!
LANGS_SRC=$(shell ls $(LANG_DIR)/*.txt)
LANGS=$(LANGS_SRC:$(LANG_DIR)/%.txt=%.lng)
CXX_BUILD= !!CXX_BUILD!!
CFLAGS_BUILD= !!CFLAGS_BUILD!!
CXXFLAGS_BUILD= !!CXXFLAGS_BUILD!!
LDFLAGS_BUILD= !!LDFLAGS_BUILD!!
STRGEN_FLAGS= !!STRGEN_FLAGS!!
STAGE= !!STAGE!!
LANG_SUPPRESS= !!LANG_SUPPRESS!!
LANG_OBJS_DIR= !!LANG_OBJS_DIR!!
ifeq($(LANG_SUPPRESS),yes)
LANG_ERRORS= >/dev/null 2>&1
endif
# Make sure endian_host.h is reachable as if it was in the src/ dir
$(Q)./$(STRGEN)$(STRGEN_FLAGS) -s $(LANG_DIR) -d $(LANG_OBJS_DIR) $< $(LANG_ERRORS)&& cp $@$(BIN_DIR)/lang ||true# Do not fail all languages when one fails
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
#
# Makefile for creating bundles of MSVC's binaries in the same way as we make
# the zip bundles for ALL other OSes.
#
# Usage: make -f Makefile.msvc PLATFORM=[Win32|x64] BUNDLE_NAME=openttd-<version>-win[32|64]
# or make -f Makefile.msvc PLATFORM=[Win32|x64] BUNDLE_NAME=OTTD-win[32|64]-nightly-<revision>
#
# Check if we want to show what we are doing
ifdefVERBOSE
Q=
else
Q= @
endif
AWK="awk"
ROOT_DIR:=$(shell pwd)
BIN_DIR="$(ROOT_DIR)/bin"
SRC_DIR="$(ROOT_DIR)/src"
BUNDLE_DIR="$(ROOT_DIR)/bundle"
BUNDLES_DIR="$(ROOT_DIR)/bundles"
TTD= openttd.exe
PDB= openttd.pdb
MODE= Release
TARGET:=$(shell echo$(PLATFORM)| sed "s@win64@x64@;s@win32@Win32@")
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
- 2.0) [Contact and community](#20-contact-and-community)
- 2.1) [Contributing to OpenTTD](#21-contributing-to-openttd)
- 2.2) [Reporting bugs](#22-reporting-bugs)
- 2.3) [Translating](#23-translating)
- 3.0) [Licensing](#30-licensing)
- 4.0) [Credits](#40-credits)
## 1.0) About
OpenTTD is a transport simulation game based upon the popular game Transport Tycoon Deluxe, written by Chris Sawyer.
It attempts to mimic the original game as closely as possible while extending it with new features.
OpenTTD is licensed under the GNU General Public License version 2.0, but includes some 3rd party software under different licenses.
See the section ["Licensing"](#30-licensing) below for details.
## 1.1) Downloading OpenTTD
OpenTTD can be downloaded from the [official OpenTTD website](https://www.openttd.org/).
Both 'stable' and 'nightly' versions are available for download:
- most people should choose the 'stable' version, as this has been more extensively tested
- the 'nightly' version includes the latest changes and features, but may sometimes be less reliable
On some platforms OpenTTD will also be available via your OS package manager or a similar service.
## 1.2) OpenTTD gameplay manual
OpenTTD has a [community-maintained wiki](https://wiki.openttd.org/), including a gameplay manual and tips.
## 1.3) Supported platforms
OpenTTD has been ported to several platforms and operating systems.
The currently working platforms are:
- FreeBSD (SDL)
- Haiku (SDL)
- Linux (SDL)
- macOS (universal) (Cocoa video and sound drivers)
- OpenBSD (SDL)
- OS/2 (SDL)
- Windows (Win32 GDI (faster) or SDL)
### 1.3.1) Legacy support
Platforms, languages and compilers change.
We'll keep support going on old platforms as long as someone is interested in supporting them, except where it means the project can't move forward to keep up with language and compiler features.
We guarantee that every revision of OpenTTD will be able to load savegames from every older revision (excepting where the savegame is corrupt).
Please report a bug if you find a save that doesn't load.
## 1.4) Installing and running OpenTTD
OpenTTD is usually straightforward to install, but for more help the wiki [includes an installation guide](https://wiki.openttd.org/en/Manual/Installation).
OpenTTD needs some additional graphics and sound files to run.
For some platforms these will be downloaded during the installation process if required.
For some platforms, you will need to refer to [the installation guide](https://wiki.openttd.org/en/Manual/Installation).
### 1.4.1) Free graphics and sound files
The free data files, split into OpenGFX for graphics, OpenSFX for sounds and
OpenMSX for music can be found at:
- https://www.openttd.org/download-opengfx for OpenGFX
- https://www.openttd.org/download-opensfx for OpenSFX
- https://www.openttd.org/download-openmsx for OpenMSX
Please follow the readme of these packages about the installation procedure.
The Windows installer can optionally download and install these packages.
### 1.4.2) Original Transport Tycoon Deluxe graphics and sound files
If you want to play with the original Transport Tycoon Deluxe data files you have to copy the data files from the CD-ROM into the baseset/ directory.
It does not matter whether you copy them from the DOS or Windows version of Transport Tycoon Deluxe.
The Windows install can optionally copy these files.
You need to copy the following files:
- sample.cat
- trg1r.grf or TRG1.GRF
- trgcr.grf or TRGC.GRF
- trghr.grf or TRGH.GRF
- trgir.grf or TRGI.GRF
- trgtr.grf or TRGT.GRF
### 1.4.3) Original Transport Tycoon Deluxe music
If you want the Transport Tycoon Deluxe music, copy the appropriate files from the original game into the baseset folder.
- TTD for Windows: All files in the gm/ folder (gm_tt00.gm up to gm_tt21.gm)
- TTD for DOS: The GM.CAT file
- Transport Tycoon Original: The GM.CAT file, but rename it to GM-TTO.CAT
## 1.5) Add-on content / mods
OpenTTD features multiple types of add-on content, which modify gameplay in different ways.
Most types of add-on content can be downloaded within OpenTTD via the 'Check Online Content' button in the main menu.
Add-on content can also be installed manually, but that's more complicated; the [OpenTTD wiki](https://wiki.openttd.org/) may offer help with that, or the [OpenTTD directory structure guide](./docs/directory_structure.md).
### 1.5.1) AI opponents
OpenTTD comes without AI opponents, so if you want to play with AIs you have to download them.
The easiest way is via the 'Check Online Content' button in the main menu.
You can select some AIs that you think are compatible with your playing style.
AI help and discussions may also be found in the [AI section of the forum](https://www.tt-forums.net/viewforum.php?f=65).
### 1.5.2) Scenarios and height maps
Scenarios and heightmaps can be added via the 'Check Online Content' button in the main menu.
### 1.5.3) NewGRFs
A wide range of add-content is available as NewGRFs, including vehicles, industries, stations, landscape objects, town names and more.
NewGRFs can be added via the 'Check Online Content' button in the main menu.
See also the wiki [guide to NewGRFs](https://wiki.openttd.org/en/Manual/NewGRF) and [the forum graphics development section](https://www.tt-forums.net/viewforum.php?f=66).
### 1.5.4) Game scripts
Game scripts can provide additional challenges or changes to the standard OpenTTD gameplay, for example setting transport goals, or changing town growth behaviour.
Game scripts can be added via the 'Check Online Content' button in the main menu.
See also the wiki [guide to game scripts](https://wiki.openttd.org/en/Manual/Game%20script) and [the forum graphics game script section](https://www.tt-forums.net/viewforum.php?f=65).
### 1.6) OpenTTD directories
OpenTTD uses its own directory structure to store game data, add-on content etc.
For more information, see the [directory structure guide](./docs/directory_structure.md).
### 1.7) Compiling OpenTTD
If you want to compile OpenTTD from source, instructions can be found in [COMPILING.md](./COMPILING.md).
## 2.0) Contact and Community
'Official' channels
- [OpenTTD website](https://www.openttd.org)
- IRC chat using #openttd on irc.oftc.net [more info about our irc channel](https://wiki.openttd.org/en/Development/IRC%20channel)
- [OpenTTD on Github](https://github.com/openTTD/) for code repositories and for reporting issues
- [forum.openttd.org](https://forum.openttd.org/) - the primary community forum site for discussing OpenTTD and related games
- [OpenTTD wiki](https://wiki.openttd.org/) community-maintained wiki, including topics like gameplay guide, detailed explanation of some game mechanics, how to use add-on content (mods) and much more
'Unofficial' channels
- the OpenTTD wiki has a [page listing OpenTTD communities](https://wiki.openttd.org/en/Community/Community) including some in languages other than English
### 2.1) Contributing to OpenTTD
We welcome contributors to OpenTTD. More information for contributors can be found in [CONTRIBUTING.md](./CONTRIBUTING.md)
### 2.2) Reporting bugs
Good bug reports are very helpful. We have a [guide to reporting bugs](./CONTRIBUTING.md#bug-reports) to help with this.
Desyncs in multiplayer are complex to debug and report (some software development skils are required).
Instructions can be found in [debugging and reporting desyncs](./docs/debugging_desyncs.md).
### 2.3) Translating
OpenTTD is translated into many languages. Translations are added and updated via the [online translation tool](https://translator.openttd.org).
## 3.0) Licensing
OpenTTD is licensed under the GNU General Public License version 2.0.
For the complete license text, see the file '[COPYING.md](./COPYING.md)'.
This license applies to all files in this distribution, except as noted below.
The squirrel implementation in `src/3rdparty/squirrel` is licensed under the Zlib license.
See `src/3rdparty/squirrel/COPYRIGHT` for the complete license text.
The md5 implementation in `src/3rdparty/md5` is licensed under the Zlib license.
See the comments in the source files in `src/3rdparty/md5` for the complete license text.
The implementations of Posix `getaddrinfo` and `getnameinfo` for OS/2 in `src/3rdparty/os2` are distributed partly under the GNU Lesser General Public License 2.1, and partly under the (3-clause) BSD license.
The exact licensing terms can be found in `src/3rdparty/os2/getaddrinfo.c` resp. `src/3rdparty/os2/getnameinfo.c`.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
@@ -7,19 +5,11 @@
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
*/
/* THIS FILE IS AUTO-GENERATED; PLEASE DO NOT ALTER MANUALLY */
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
* OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
* OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
@@ -7,19 +5,11 @@
* See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
*/
/* THIS FILE IS AUTO-GENERATED; PLEASE DO NOT ALTER MANUALLY */
Feature: [GS] Ability to set some extra text in the industry window (#8576)
Feature: Show rainforest under vegetation on smallmap (#8562)
Feature: Automatically determine window size on new install (#8536)
Feature: Towns can build tunnels (#8473)
Feature: Make maximum length of town bridges depend on population (with a minimum limit of 4) (#8439)
Feature: New icons for renaming and go-to-location on GUI windows, and improve consistency of usage (#8455)
Feature: Support for ARM64 on Apple Silicon and Windows (#8340, #8577, #8583)
Feature: Add an option to disable tree growth completely (#8415)
Feature: Support for Emscripten (play-OpenTTD-in-the-browser!) (#8355)
Feature: Show group name as part of the default vehicle name (#8307)
Feature: "Frozen" economy setting that stops production changes and industry closures (#8282)
Feature: New velocity unit "tiles/day" (#8278)
Feature: Option to automatically remove signals when placing rail (#8274)
Feature: Increase max possible distance from border for oil refineries and rigs (#8237)
Feature: Improve tree planting window, and allow planting 'clumps' of trees by dragging in the scenario editor (#8234)
Feature: Indian Rupee (INR) currency (#8136)
Feature: [GS] Ability to give a company exclusive access to an industry (#8115)
Feature: Hotkeys for Land Info window, News window & close error window (#8053, #8266)
Feature: Improve rendering of large viewports (#7962)
Feature: [GS] Influence industry production changes from GameScript (#7912)
Feature: [GS] Push-buttons on storybook pages (#7896)
Feature: Option to group vehicle lists by shared orders (#7028)
Feature: Drag-and-drop vehicles in group GUI for shared order groups (#7028)
Add: [GS] A tile parameter to GSCompany::ChangeBankBalance for showing changes more visually (#8573)
Add: [NewGRF] Allow NewGRF vehicles to query the current rail/road/tram type (#8554)
Add: [Script] ScriptCargo::GetName for the human readable name of cargoes (#8544)
Add: "reload" console command to reload the current scenario or heightmap (#8527)
Add: [NewGRF] Flag to test if inflation is on or off (#8427)
Add: [Script] Native priority queue (useful for things like pathfinders) (#8091)
Add: [NewGRF] Industry behaviour flag to override second cargo production clamping for water industries when using smooth economy (#8079)
Change: [SDL2] Start game on the screen where the cursor is (#8572)
Change: Use a dark background for all profit graphs to increase contrast (#8557)
Change: Reword warning in cheat window (#8538)
Change: Enable the toolbar for road/rail/dock/airport, regardless of vehicle availability (#8521)
Change: For arctic and tropical climates, make sure at least a few hills are generated (#8513)
Change: Destroying a tunnel/bridge now sells the tracks before destroying the tunnel/bridge (#8508)
Change: Move "give money" from client-list to company window (#8500)
Change: [MacOS] Hide Dock and menu when in fullscreen mode (#8487)
Change: Improve performance for complex vehicle chains by resolving sprites less frequently (#8485)
Change: Make engine reliability independent of introduction date (#8470)
Change: Some default settings to improve gameplay for new players - default non-stop orders on, disable inflation, quick goto orders, show track reservations, and more (#8463)
Change: Converting town-owned road types now requires a positive town rating (#8457)
Change: Rework server list buttons for searching LAN/internet servers (#8426)
Change: Add some styling to GS question windows depending on the type (#8422)
Change: [Linkgraph] Speed up game exit by allowing job threads to be aborted early (#8416)
Change: Prevent towns from building dead-end road bridges (#8401)
Change: Send network error to the server before making an emergency save (#8387)
Change: Extend the allowed range for max loan setting up to £2 billion (#8386)
Change: Don't display OS name when exiting the game (#8366)
Change: Save openttd.cfg immediately on changing a setting (#8358)
Change: Autorenew now defaults to on (#8352)
Change: [NewGRF] Also use aircraft property 12 for helicopters (#8347)
Change: Service at depot also resets breakdown chance (#8317)
Change: Use key names instead of characters in hotkey.cfg (#8291)
Change: Allow command cost-estimation while paused (#8222)
Change: Always apply inflation from 1920 to 2090, no matter the game start year (#7589)
Change: Use CMake for build system (#7270)
Change: [Linkgraph] Pause the game when linkgraph jobs lag (#7081)
Change: Place "Group by" above "Sort by" in station window for consistency (#7028)
Fix #8589: Prevent desyncs with vehicle motion counters and NewGRFs (#8591)
Fix #7670: Improve pathfinder performance when lost vehicles are blocked from moving (#8568)
Fix: Inform user if a custom font failed to load due to missing glyphs (#8559)
Fix: Don't allow wagon chains (without an engine) to exceed maximum train length (#8533)
Fix #7619: Super fast NewGRF aircraft could be unable to land (#8531)
Fix: Improve connection retries for the content server in cases of broken networking (#8530)
Fix #7972: Show invalid orders to stations that don't accept the vehicle (#8516)
Fix: Error when trying to clone a vehicle with invalid orders (#8515)
Fix #8050: Various off-by-one errors in how the end-year of the game was used (#8512)
Fix #8332: Aborting vehicle group drag & drop could cause crashes (#8511)
Fix #8168: Allow relocating HQ partially over an existing HQ (#8510)
Fix #8068: Allow selling tram track regardless of bank balance (#8509)
Fix #7604: Prevent houses from wandering away from roads (#8507)
Fix: Make the "password" button the same size as the other buttons in the Company window (#8500)
Fix #7611: Keep news about vehicle accidents around after the vehicle is cleaned up (#8497)
Fix: [MacOS] Full animation in fullscreen mode was reducing the height of the window (#8491)
Fix: [MacOS] Loading custom fonts (#8484)
Fix: Network client makes emergency saves twice if the server is disconnected (#8477)
Fix #8462: Stop towns from trying to build roads on water (#8471)
Fix: [NewGRF] GetCurveSpeedLimit should use the railtype from the current tile (#8466)
Fix #8437: Crash when using certain heliports with certain rotated airports (#8458)
Fix #8437: Planes would land at the wrong height if the top corner of the airport was lowered (#8458)
- Change: Do not display a news message about old vehicles when a replacement for it is activated (#7401)
- Change: When filtering purchase list by cargo type, buy button now performs a refit if required (#7301)
- Change: Don't apply forbid 90 deg turn settings to ships, and make penalties for turns configurable (#7289, #7372)
- Change: Make the chance of an aeroplane crashing at an airport with a short runway independent of plane crash setting (#7302)
- Change: Keep town growth rate in sync with house count (#6777)
- Fix #6219: Improve helicopter's ability to takeoff from commuter and international airports (#7710)
- Fix #6407: Show snowy ground sprites for train depots (#7671)
- Fix: Power/running cost sorting algorithm was not correct when power was higher than running cost (#7561)
- Fix: Tweaks to small-map colours to make dark blue company more visible (#7436, #7450)
- Fix: [SDL] Do not offer video smaller than 640x480 (#7442)
- Fix: Incorrect display of industry production around tiles (#7426)
- Fix: Show industry name in Land Area Information window for industries with neutral stations instead of just 'Oil Rig' (#7349)
- Fix: Remove redundant and broken file lookups when loading base sets (#7348)
- Fix: Always report error when ordering a road vehicle to wrong type of road stop (#7316)
- Fix #7043, #7274: Improve performance when creating towns during world creation (#7284)
- Fix #7062: Remove ship max order distance (#7279)
- Fix #7189: Fluidsynth volume gain too high (#7253)
- Fix: Add setting for whether industries with neutral stations (e.g. Oil rigs) accept and supply cargo to/from surrounding stations to fix exploit as old as TTO (#7234)
- Fix: Properly reset dropdown menu windows after changing AI/GS settings (#7092)
- Remove: DOS, MorphOS, AmigaOS & BeOS support (#7326, #7388)
- Feature: Add option to close windows with right click [FS#4950] (r27826, r27825)
- Feature: Vehicle Group Info: Add profits and occupancy display to group vehicle list (r27822)
- Feature: Display aircraft type in vehicle preview/purchase/detail windows (r27802, r27799, r27797)
- Change: [NewGRF] Various performance improvements to resolving VA2 (r27989, r27985, r27984, r27983, r27982)
- Change: [NewGRF] Increase maximum allowed vehicle sprite size to reduce clipping of ships (r27987)
- Change: Check companies for bankruptcy before subtracting reoccuring monthly costs [FS#6679] (r27981)
- Change: [GFX] Replace the office building sprite on various toyland airports with a better fitting sprite [FS#6664] (r27977)
- Change: [GFX] The switch-toolbar icon contained pixels from the fire cycle. Replace the whole icon with a new version [FS#6654] (r27961)
- Change: Reword texts in industry view, when stockpiling is used (r27952)
- Change: Remove the gap between windows when positioning them after opening [FS#6568] (r27934, r27900)
- Change: [Build] Enable usage of static_assert for MSVC (r27916)
- Change: [Build] Preserve PKG_CONFIG_PATH and PKG_CONFIG_LIBDIR environment variables in config.cache file [FS#6614] (r27902)
- Change: Do not cancel headquarter construction and engine-preview-query when shift-clicking (r27889)
- Change: Parse extmidi command string for parameters to pass on (r27834)
- Change: Draw images in centre of buttons (r27829, r27821)
- Fix: Store the map variety setting in the savegame like the other mapgen settings, so restarting maps considers it [FS#6673] (r27978)
- Fix: Hair selection was missing one option [FS#6642] (r27975)
- Fix: Avoid tile operations outside map border when building lock [FS#6662] (r27973)
- Fix: Catenary sprites got mixed up for depots [FS#6670] (r27972)
- Fix: Make automatic window-positioning RTL-aware (r27934, r27900)
- Fix: Automatic window-positioning now uses GUI-scale/style dependent sizes/distances instead of fixed pixel values (r27934, r27900)
- Fix: [NewGRF] While executing random triggers, var 5F should include the new triggers (r27928)
- Fix: [NewGRF] Reset used random triggers only after all A123 chains have been resolved, so that all RA2 in all chains can test the shared triggers (r27928)
- Fix: [NewGRF] Industry random triggers are stored per tile, even when randomising the shared random bits of the parent industry (r27928)
- Fix: [NPF] Reserved track bits were not accounted for when trying to find any safe position (r27912)
- Fix: Do not modify argv[0] [FS#6575] (r27886)
- Fix: Do not search directories when opening ini files as we already have their full path [FS#6421] (r27816)
- Fix: Road tunnel/bridge heads have no trackbits wrt. catenary drawing (r27812)
- Fix: [Win32] Right mouse scrolling didn't work properly with the Windows 10 Fall Creators Update [FS#6629] (r27935)
- Fix: Forest, candyfloss forest and battery farm skipped the first animation frame [FS#6639] (r27932)
- Fix: Glyphs in range U+0020 to U+00FF may only be defined in orig_extra.grf, not in openttd.grf [FS#6620] (r27915)
- Fix: 'unban' console command was not handling IPv6 adresses properly (r27914, r27913)
- Fix: 'unban' console command was not handling IPv6 addresses properly (r27914, r27913)
- Fix: Keep the 'link' between industry chain and smallmap windows whenever possible [FS#6585] (r27905)
- Fix: When the last vehicle is removed from a shared orders group, hide the 'Stop sharing' button in the vehicle orders window [FS#6593] (r27904)
- Fix: Tooltip of 'increase service interval' said 'decrease' [FS#6606] (r27895)
@@ -116,7 +652,7 @@
- Fix: [Build] Force sorting to be locale independent, so files are always ordered the same and by that token better diff-able (r27562, r27558)
- Fix: Typos in comments and string (r27561, r27560)
- Fix: [Build] bashism that caused different CFLAGS with bash vs dash (r27557)
- Fix: Use a more appropiate sound effect for convert-rail (r27547)
- Fix: Use a more appropriate sound effect for convert-rail (r27547)
- Fix: Remove SetFill from vehicle GUI buttons, so that the viewport is resized instead of them in case of long window titles (r27546)
- Fix: [Script] Generation of API wrappers (r27545, r27544, r27543)
- Fix: [Windows] ICU got disabled for Windows builds, breaking RTL support [FS#6427] (r27542)
@@ -3007,7 +3543,7 @@
- Fix: Improve corner case order handling: mark order as done only when actually done, obey non-stop orders, do only stop/refit at the depot in the order (r16240, r16228, r16199, r16198, r16187)
- Fix: [NoAI] Use the stop/non-stop intermediate orderflags AIs can give for goto-depot orders (r16239)
- Fix: [NewGRF] ActionB should use the online parameters from GRFFile instead of the initial user-specified values from GRFConfig. Also use the values as they were set when the ActionB was executed, not as they are set when the message is shown (r16223)
- Fix: Possible crashes when quiting OpenTTD or forcing resizes/redraws of the screen during map generation [FS#2862] (r16220)
- Fix: Possible crashes when quitting OpenTTD or forcing resizes/redraws of the screen during map generation [FS#2862] (r16220)
- Fix: Shared orders without orders were not properly converted causing corrupt/invalid orders when loading pre 0.7 savegames [FS#2878] (r16214)
- Fix: [Squirrel] The traps variable was not restored, causing try/catch blocks to be 'forgotten' during a suspend (r16181)
@@ -3015,7 +3551,7 @@
- Fix: Forbid joining AI companies via the 'move' and 'join' console commands/multiplayer lobby (r16176, r16175)
- Fix: [NoAI] AIOrder::GetOrderDestination and AIOrder::GetOrderFlags did not work on ORDER_CURRENT when the vehicle was loading/leaving in a station (r16165)
- Fix: [NoAI] Change WAYPOINT_INVALID to 0xFFFF from -1 as that is the value the AIs got (due to casting) (r16150)
- Fix: The overflowsafe type did not like dividing by int64 larger than MAX_INT32 causing division by negative numbers and small anomolies when drawing graphs [FS#2855] (r16130)
- Fix: The overflowsafe type did not like dividing by int64 larger than MAX_INT32 causing division by negative numbers and small anomalies when drawing graphs [FS#2855] (r16130)
- Fix: Road was removed when both the Remove button was active and Ctrl was pressed [FS#2582] (r16119)
- Fix: [NoAI] Make sure AIOrder::GetDestination always returns a tile belonging to the station (16109)
- Fix: [NoAI] When giving an aircraft a goto-hangar order do not let it be a normal goto-station order (r16108)
@@ -3471,7 +4007,7 @@
- Fix: Inconsistent use of 8/15-bitness of NewGRF callback results with respect to TTDP's implementation of the specification (r12819, r12818, r12759)
- Fix: Possible out of bounds array access (r12809)
- Fix: Enforce autorenew values range in command (r12808)
- Fix: Vehicles could break down during loading and keep loading. The intention of the break down code is not to break down when having zero speed, therefor break downs now do not happen when loading [FS#1938] (r12795)
- Fix: Vehicles could break down during loading and keep loading. The intention of the break down code is not to break down when having zero speed, therefore break downs now do not happen when loading [FS#1938] (r12795)
- Fix: [OSX] In some rare cases when using an uncalibrated monitor the system colour space could not be retrieved. Show an error when this happens instead of just trying an assertion (r12776)
- Fix: Slope checking for NewGRFs failed (r12759)
- Fix: Check the TILE_NOT_SLOPED flag of the _north_ tile of multi-tile houses to decide if autoslope is allowed (r12717)
@@ -3579,7 +4115,7 @@
- Feature: Separate catenary transparency settings from building transparency settings (r12103)
- Feature: Allow locking individual transparency settings so they will not be changed by pressing 'x' (r12102)
- Feature: Add some missing VarAction2 variables (r12124)
- Feature: Make snow appear on rail tiles dependant on track height, not on height of the lowest part of the tile (r12098)
- Feature: Make snow appear on rail tiles dependent on track height, not on height of the lowest part of the tile (r12098)
- Feature: [NewGRF] Specify the purchase, rail and road description of a bridge (r12069)
- Feature: [NewGRF] Add support for var 12, Variational Action 2 (r12045)
- Feature: Allow trees on shore (r12029)
@@ -3860,7 +4396,7 @@
- Feature: Add support for variable snow lines in the arctic climate, supplied by NewGRF files (r9371)
- Feature: [NewGRF] Add support for newhouses (r9315)
- Feature: [NewGRF] Add support for Action 13, which allows you to translate GRF-specific texts. The translations will only be shown if you are using a language with a GRF language id and if a string has not already been set specifically for the language you are using (r9037)
- Feature: Translation dependant formatting of dates (r8906)
- Feature: Translation dependent formatting of dates (r8906)
- Feature: If an action 7/9 leads to skipping the rest of the file, disable the NewGRF if an action 8 has not been encountered yet (r8831)
- Feature: Stop loading and disable the current NewGRF if a fatal error message in Action B is encountered. Also be more strict on the values accepted (r8830)
- Feature: Build aircraft windows will no longer show aircraft that cannot use the airport in question (r8771)
@@ -3981,7 +4517,7 @@
- Fix: Do not display income/expenses when they do not belong to a 'valid' tile, like the money cheat and giving money [FS#1175] (r11021)
- Fix: One could not give money when (s)he had too much money [FS#1174] (r11020)
- Fix: Disallow buying/selling shares in your own company or a bankrupt company [FS#1169] (r11018)
- Fix: Crash when quiting the game in one of the end score windows [FS#1218] (r11071)
- Fix: Crash when quitting the game in one of the end score windows [FS#1218] (r11071)
message(WARNING"Unknown ${UNSUPPORTED_PLATFORM_NAME} found for packaging; can only pack to a txz. Please consider creating a Pull Request to add support for this distribution.")
# OpenTTD is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2.
# OpenTTD is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with OpenTTD. If not, see <http://www.gnu.org/licenses/>.
check_path_characters() {
if [ -n "`echo $ROOT_DIR | grep '[^-_A-Za-z0-9\/\\\.:]'`" ]; then
echo "WARNING: The path contains a non-alphanumeric character that might cause"
echo " failures in subsequent build stages. Any failures with the build"
echo " will most likely be caused by this."
fi
}
CONFIGURE_EXECUTABLE="$_"
# On *nix systems those two are equal when ./configure is done
if [ "$0" != "$CONFIGURE_EXECUTABLE" ]; then
# On some systems, when ./configure is triggered from 'make'
# the $_ is filled with 'make'. So if that is true, skip 'make'
# and use $0 (and hope that is correct ;))
if [ -n "`echo $CONFIGURE_EXECUTABLE | grep make`" ]; then
CONFIGURE_EXECUTABLE="$0"
else
CONFIGURE_EXECUTABLE="$CONFIGURE_EXECUTABLE $0"
fi
fi
# Find out where configure is (in what dir)
ROOT_DIR="`dirname $0`"
# For MSYS/MinGW we want to know the FULL path. This as that path is generated
# once you call an outside binary. Having the same path for the rest is needed
# for dependency checking.
# pwd -W returns said FULL path, but doesn't exist on others so fall back.
To build, you should, if your environment is set up well enough, be able to just
type `./configure' (or `sh configure' if you're using the OS/2 shell) and `make'.
You may have to manually specify `--os OS2' on the configure command line, as
configure cannot always detect OS/2 correctly.
A note on Open Watcom
---------------------
Open Watcom C/C++ was previously used to build OpenTTD (version 0.4.x and earlier).
However, due to advanced C++ features used in the YAPF portion of OpenTTD 0.5
in particular, the compiler is no longer able to build the game at the moment.
Hopefully one day Open Watcom will be able to catch up and we will be able to build
the game once again (it's easier than getting an OS/2 UNIX-like environment set up
in my opinion!), but until then, OpenTTD 0.5 and later can only be built with GCC.
Libraries Required
------------------
The following libraries are required. To build zlib and libpng, I
simply added the required files (watch out for sample programs, etc)
to an IDE project file and built a library. Do not use the makefiles
provided, they are not designed for Watcom (apart from SDL):
- zlib
http://www.zlib.org/
- libpng
http://www.libpng.org/
- SDL for OS/2
ftp://ftp.netlabs.org/pub/sdl/sdl-1.2.7-src-20051222.zip used for
0.4.7
- Freetype
http://freetype.sourceforge.net/
Currently, there are no pre-built libraries available for GCC. If you manage to get
OpenTTD working on Watcom though (do let us know if this is the case!), pre-built
versions can be downloaded from the Files section at
http://sourceforge.net/projects/openttd/ - see "os2-useful-v1.1.zip".
Contact Information
-------------------
If you have any questions regarding OS/2 issues, please contact me
(owen@owenrudge.net) and I'll try to help you out. For general OpenTTD
issues, see the Contacting section of readme.txt.
Thanks to Paul Smedley for his help with getting OpenTTD to compile under GCC on OS/2.
- Owen Rudge, 24th June 2007
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
