When you are downloading a map, all the commands are queued up
for you. Clients joining/leaving is done by the network protocol,
and as such are processed immediately. This means that by the
time you are processing the commands, a client that triggered
it, might already have left.
So, all commands that do something with ClientID, shouldn't
error on an invalid ClientID when DC_EXEC is set, but
gracefully handle the command anyway, to make sure the
game-state is kept in sync with all the clients that did
execute the DoCommand while the now-gone client was still
there.
Additionally, in the small chance a client disconnects between
the server validating a DoCommand and the command being
executed, also just process the command as if the client was
still there. Otherwise, lag or latency can cause clients that
did not receive the disconnect yet to desync.
Strictly seen, there are "N" people -waiting- in front of you
in the queue, but it is nicer to show "N + 1" for the person that
is currently downloading the map. Avoids it showing:
"0 clients in front of you". That just feels a bit off.
swedish: 60 changes by kustridaren
norwegian (bokmal): 12 changes by buzzCraft
czech: 82 changes by PatrikSamuelTauchim, 1 change by tomas-vl
italian: 86 changes by AlphaJack, 9 changes by federico1564S
german: 16 changes by ebla71
romanian: 10 changes by ALEX11BR
ukrainian: 3 changes by StepanIvasyn
spanish: 1 change by MontyMontana
SendError() notifies all clients of the disconnect. This calls
CloseConnection() at the end, which also notified the clients
of the disconnect. Really no need to do it twice.
The status NETWORK_RECV_STATUS_SERVER_ERROR is only set by
SendError(), so in case that is the status, don't let
ClientConnection() send another notification.
CheckCompanyHasMoney() was also executed when not using DC_EXEC,
resulting in an error about shortage of money instead of the
estimation.
This mostly is a problem for AI players, as they will have no
way to know how much it would have cost.
Basically, follow_track.hpp contains a fix for half-tiles, but
this wasn't duplicated for when trying to find a depot and in
a few other places. This makes sure all places act the same.
MainLoop() is used to bootstrap OSX, where later a callback is
done to GameLoop() to execute OpenTTD. All other video drivers
don't need that, so what is in GameLoop is in MainLoop for all
other drivers. This is rather confusing. So, instead, name
GameLoop MainLoopReal to be more in sync with the other drivers.
This makes it a bit easier to follow what is going on, and
allow future subdrivers to hook into a few of these functions.
Reworked the code slighly while at it, to return early where
possible.
When we clip the region that is only been redrawn, something
weird happens on Windows. When pushing 60 frames per second on a
60Hz monitor, it appears that the clipped region is often shown
of another frame, instead of the current.
Examples of this are:
- pause the game, move your mouse to the left, and at the right
speed it totally disappears.
- fast aircrafts seem to be in several places at once, weirdly
lagging behind.
- in title screen, moving your mouse gives you the idea it is
jumping places, instead of smooth movements.
In the end, if you do nothing, everything is correct, so it is
eventually consistent. Just when we are firing many BitBlt in
a clipped region, the in-between is not.
What goes wrong exactly, I honestly do not know. On every frame
that we push to the DC is a mouse painted, but visually it
sometimes appears like it is not. Recording with external software
shows it really is there.
It is also not our eyes playing tricks on us, as the first example
makes it really clear the mouse pointer really is not painted.
And to be clear, with the mouse this is easiest reproduceable,
as high-speed objects are influences by this most. But this happens
for all movement that redraws small regions.
Either way, not using clipped regions resolves the issue completely,
and there appears to be little to no penalty (I failed to measure
any impact of drawing the full screen). So better have a good game
than fast code, I guess?
When drawing an 8bpp screen buffer, palette resolving was done for each
dirty rectangle. In areas with high activity, this would mean a pixel might
have been resolved multiple times. Also, if too many individual updates
were queued, the whole screen would be refreshed, even if unnecessary.
All other drivers only keep one overall dirty rect, so do it here as well.
These were special settings only for the win32-drivers, and
introduced in the very first version we track.
Time kinda had caught up with those variables, so it is time to
say farewell.
force_full_redraw was most likely a debug functionality "in case
our dirty-rect fails". This should no longer be needed.
display_hz was cute, as it had a max of 120. That is kinda
out-dated information, but I also doubt anyone was really using
this.
In file included from src/settingsgen/../string_func.h:30,
from src/settingsgen/settingsgen.cpp:11:
src/settingsgen/../core/bitmath_func.hpp:34:15: error: 'uint' does not name a type; did you mean 'uint8'?
34 | static inline uint GB(const T x, const uint8 s, const uint8 n)
| ^~~~
| uint8
WM_PAINT hits when-ever Windows feels like, but always after we
marked the screen as dirty. In result, it was lagging behind,
giving a sub-60fps experience.
With the new draw-tick there is no longer a need to be driven by
WM_PAINT, so it is better anyway to drive the drawing ourself. As
an added bonus this makes the win32 driver more like the others.
For some reason I only converted one of the two modal windows we
have, and completely forgot the other.
While at it, synchronize the way those two modal windows work
in terms of "next_update".
The higher your refresh-rate, the more likely this is. Mostly you
notice this when creating a new game or when abandoning a game.
This is a bit of a hack to keep the old behaviour, as before this
patch the game was already freezing your mouse while it was changing
game-mode, and it does this too after this patch. Just now it
freezes too a few frames earlier, to prevent not drawing windows
people still expect to see.
Most modern games run on 60 fps, and for good reason. This gives
a much smoother experiences.
As some people have monitors that can do 144Hz or even 240Hz, allow
people to configure the refresh rate. Of course, the higher you
set the value, the more time the game spends on drawing pixels
instead of simulating the game, which has an effect on simulation
speed.
The simulation will still always run at 33.33 fps, and is not
influences by this setting.
Sleep for 1ms (which is always (a lot) more than 1ms) is just
randomly guessing and hoping you hit your deadline, give or take.
But given we can calculate when our next frame is happening, we
can just sleep for that exact amount. As these values are often
a bit larger, it is also more likely the OS can schedule us back
in close to our requested target. This means it is more likely we
hit our deadlines, which makes the FPS a lot more stable.
Before, every next frame was calculated from the current time.
If for some reason the current frame was drifting a bit, the
next would too, and the next more, etc etc. This meant we rarely
hit the targets we would like, like 33.33fps.
Instead, allow video-drivers to drift slightly, and schedule the
next frame based on the time the last should have happened. Only
if the drift gets too much, that deadlines are missed for longer
period of times, schedule the next frame based on the current
time.
This makes the FPS a lot smoother, as sleeps aren't as exact as
you might think.
During fast-forward, the game was drawing as fast as it could. This
means that the fast-forward was limited also by how fast we could
draw, something that people in general don't expect.
To give an extreme case, if you are fully zoomed out on a busy
map, fast-forward would be mostly limited because of the time it
takes to draw the screen.
By decoupling the draw-tick and game-tick, we can keep the pace
of the draw-tick the same while speeding up the game-tick. To use
the extreme case as example again, if you are fully zoomed out
now, the screen only redraws 33.33 times per second, fast-forwarding
or not. This means fast-forward is much more likely to go at the
same speed, no matter what you are looking at.
_realtime_tick was reset every time the diff was calculated. This
means if it would trigger, say, every N.9 milliseconds, it would
after two iterations already drift a millisecond. This adds up
pretty quick.
On all OSes we tested the std::chrono::steady_clock is of a high
enough resolution to do millisecond measurements, which is all we
need.
By accident, this fixes a Win32 driver bug, where we would never
hit our targets, as the resolution of the clock was too low to
do accurate millisecond measurements with (it was ~16ms resolution
instead).
InvalidateWindowData with mode SBI_NEWS_DELETED was called on the
status bar when checking for a new item of news to be shown in the
ticker, even if there is no news queued and no change occurs.
When there are a lot of rects to redraw, of which one of the last
ones is almost the full screen, visual tearing happens over the
vertical axis. This is most visible when scrolling the map.
This can be prevented by using less rects. To simplify the situation,
and as solutions like OpenGL need this anyway, keep a single rect
that shows the biggest size that updates everything correctly.
Although this means it needs a bit more time redrawing where it
is strictly seen not needed, it also means less commands have
to be executed in the backend. In the end, this is a trade-off,
and from experiments it seems the approach of this commit gives
a better result.
During resizing, there can still be dirty-rects ready to blit based
on the old dimensions. X11 with shared memory enabled crashes if
you try to do this. So, instead, if we resize, reset the dirty-rects.
This is fine, as moments later we mark the whole (new) screen as
dirty anyway.
The first point was counted, but also initialized as "last". As
such, it didn't add to "total", but did add to "count", which made
the "count" 1 more than the total actually represents.
korean: 2 changes by telk5093
indonesian: 11 changes by dimaspaf14
russian: 2 changes by Ln-Wolf
finnish: 3 changes by hpiirai
french: 4 changes by glx22
The zoom level suggestion is based on the DPI scaling set in Windows.
We use 150% scaling as the threshold for 2X zoom and 300% scaling
as the threshold for 4X zoom.
We never change the real screen resolution on OSX. As such, offering a list
of resolutions is pointless. Instead of that, offer the user a list of
commonly used window sizes up to the current screen size.
Many of the member variables that are used in save/load are inside types
that are not standard layout types. Using pointer arithmetics to determine
addresses of members inside types that are not standard layout is generally
undefined behaviour. If we'd use C++17, it is conditionally supported, which means
each compiler may or may not support it. And even then using it for individual
array elements is syntactically not supported the the standard offsetof function.
Unfortunately, the trickery employed for saving linkgraph settings causes quite some
clutter in the settings ini files.
Many of the member variables that are used in the oldloader are inside types
that are not standard layout types. Using pointer arithmetics to determine
addresses of members inside types that are not standard layout is generally
undefined behaviour. If we'd use C++17, it is conditionally supported, which means
each compiler may or may not support it. And even then using it for individual
array elements is syntactically not supported the the standard offsetof function.
In testing, I could find no reason why this statement is here.
The comment is rather unclear (it states what it does, but not
why it would be needed).
This line of code was introduced with f4f40448, which gives no
further insight on why it would be needed to have it here.
As such, let's remove it and see if anyone else reports any
problems with it. If so, this commit can be reverted and a more
clear comment should be added what this line of code is dealing
with (the WHY, not the WHAT).
This means the code depended that the caller did this for us
before MakePalette() is executed, which is neither a
requirement nor a promise the code makes.
When the wayland SDL video driver is used, an EGL context is
created in the main thread. It is not allowed to update this
context from another thread, which is exactly what our draw-thread
is trying.
The other solution would be to move all of SDL into the
draw-thread, but that would introduce a whole scala of different
problems.
The wayland SDL backend is significantly faster than the
X11 SDL backend, but there is a performance hit nevertheless.
If a server is compatible, it falls back to sorting by clients.
This used to be in reverse, so full servers are on top. With
the codechange commit, this was removed by accident, and as
such empty servers were on top. This is silly.
It now follows more what the Win32 driver does, and has far less
exceptions and special casing.
MakePalette creates the Palette and prepares surface.
UpdatePalette updates the Palette.
CheckPaletteAnim checks if UpdatePalette needs to be called and
marks the whole screen dirty so DrawSurfaceToScreen will do a
full redraw.
Sometimes it returned an usererror(), sometimes Start() failed.
Now it always fails on Start(), so nothing else has to check again
what blitter is used.
AfterBlitterChange() can never change to a 0bpp, so it is sufficient
to guard this with an assert().
Additionally, tell exactly why the font failed to load, which
glyph was missing from the font. This hopefully helps the user
a bit more in the right direction.
This makes no sense, that a free-wagon-chain could be larger than
the maximum length of a train, as you cannot put an engine in
front of that anyway. And it prevents run-away AIs making very
silly long free-wagon-chains.
The current "restart" command is now called "reload", as that is
what it does.
The old "restart" command is now called "restart", as that is what
it did.
As this has not been in any official release yet, this shouldn't
harm any kitten.
For non-NewGRF planes, "count" is never above 1. So planes can
smoothly be guided to their destination. For NewGRF planes, they
can go as quick as "count" values of 20. This easily overshoots
the target. So, calculate if the plane will overshoot, and start
nudging him to the destination earlier. You won't notice this
either way, as it all happens within a single tick.
Although meant as a funny joke towards the player, our social
standards have changed since 2004, and such "jokes" are no
longer acceptable by the community as a whole.
The only value of the message is that people are informed the
information is stored in the savegame. This is mostly useful for
us, developers, as some of those cheats can have side-effects
which people report.
While at it, styled the GUI a bit better, as the way the text
was presented was odd.
korean: 2 changes by telk5093
finnish: 2 changes by hpiirai
dutch: 49 changes by Afoklala
spanish: 16 changes by Luis45ccs
french: 7 changes by dimensi0n
polish: 2 changes by yazalo
This change allows a user to see what is available and what will become
available before it is available, instead of only disabling the button
with no further explanation. It also always allows building roads and
canals, even if no vehicles are available for road / water.
For rail/road/tram, a dropdown with available types is shown. If
none are available, it reads "None". If the type is not yet available,
it is greyed out.
For dock/airport, this always open the toolbar, but building airports,
docks, and depots buttons are disabled till vehicles are available
for those.
Road is the only exception, with the primary road always being
available. Here too, stations and depots are disabled till vehicles
become available. It does mean you can now always build roads to
for example help towns grow.
Before it was shown as a normal order, but the vehicle was skipping
it. This was rather unclear to the user. Now it is red and contains
text with some hints what is going on.
The text is prefixed rather than post-fixed, as we have many
post-fixes already.
This reverts commit c1fddb9a6a and 639cfa43d2.
access_mode "none" is only supported by GCC11, but introduced
after it branched. So there are GCC11.0s out there that do not
support it. We will have to wait for GCC11.1 to hit before we
can re-add this.
Without hills, not all industries can be generated, which means
that with a default configuration you get errors. This is far from
optimal, of course.
This now forces that there is at least some hills, even when you
are using very-flat. This is a stopgap solution, but a proper
solution requires a full rewrite of the terrain generator, which
is not a 2 minute (or even 2 week) job.
To make sure flat is still flat-ish, reduce the default
snow-line-height to 10, making it look a lot better on smaller maps.
This is a compromise between being able to have flat maps and
still having all industries on arctic.
This means that for rail tunnel/bridges, the rail is first sold,
and the tunnel/bridge is destroyed after. This means destroying
tunnels/ bridges now often makes you money, instead of costing.
Similar, with road/tram tracks. Destroying a road+tram
tunnel/bridge now costs the same amount of money as first
removing the tram tracks and than destroying the road
tunnel/bridge. Especially as tram tracks generate money when
removing, this is a noticeable difference.
It only considered the end-tile (or start-tile) for the bridge,
instead of both. This is obvious in the rest of the code which
constantly does "+ 2"; this being the only place that does a "+ 1".
Despite what it looked like, you could never really change the
ending-year (it was always reset to 2050 on start-up). See commit
683b65ee1 for details. As a side-effect, the variable that was
suppose to store the ending-year was just zero, never containing
a real ending-year.
MAX_YEAR is set to 5000000, but having an ending-year set to the
same meant you could bypass this, and play till the uint32 wrapped.
The game can either show highscore or wrap year, not both. When
you would do both, every year you get the highscore dialog.
By changing the maximum value of ending-year to 4999999 we prevent
this issue.
spanish (mexican): 5 changes by absay
korean: 5 changes by telk5093
finnish: 5 changes by hpiirai
latvian: 14 changes by lexuslatvia
spanish: 23 changes by SeveralCircles, 10 changes by Luis45ccs
polish: 5 changes by yazalo
The selected group was not reset when drag&drop was aborted. When
after that vehicle drag&drop was successful, group drag&drop code
was still executed, causing weird behaviour or even crashes.
When a multi-tile house is rebuild, it always used the most northern
tile to build the new house. This can very easily lead to houses
wandering off in the north-ish direction (either NW or NE).
To prevent this, pick the tile closest to town center when rebuilding
on a multi-tile house. This still means a house can be build away
from a road, but it is no longer wandering around finding another
town to call home.
This is a much better location for this button, as you send
money from one company to another company, not from player
to player.
This is based on work done by JGRPP in:
f820543391
and surrounding commits, which took the work from estys:
https://www.tt-forums.net/viewtopic.php?p=1183311#p1183311
We did modify it to fix several bugs and clean up the code while
here anyway.
The callback was removed, as it meant a modified client could
prevent anyone from seeing money was transfered. The message
is now generated in the command itself, making that impossible.
When a vehicle is cleaned up, all news that points to the news is
also removed. This was a bit evil, as it would also remove any
news related to crashed, acting like the crash never happened.
This left players a bit in the dark what was going on exactly.
This means that if you start OpenTTD with "-c" to indicate another
location to store files, it can still read the content you already
downloaded from your PERSONAL_DIR. This folder is, however,
read-only.
This is useful for situations where you downloaded OpenGFX via
the content-service, but want to run the regression or want to
run with a clean configuration. With this change, you no longer
need to download OpenGFX again.
When running with -dsl=2 it is very easy to miss important information
as there was a lot of noise in between too. This tunes the debug
levels a bit to be less noisy while keeping the important bits.
The previous fix 887e9481ff0e70df6bf93ce15a3899a03f124c50 only worked for roads and failed to consider a multiplier used for the infrastructure totals for tunnels/bridges.
Also, depots and bus/truck stops are counted as 2 road pieces on creation but were only counted as 1 road piece on conversion because the function DiagDirToRoadBits() was used, which only ever returns single-piece road segments.
Co-authored-by: A. S <admin-git@sotai.tk>
Patric Stout
translators
dP
Charles Pigott
Michael Lutz
frosch
Tyler Trahan
Niels Martin Hansen
SamuXarick
Joe Stringer
Tegas Aziz
Didac Perez Parera
Jonathan G Rennison
Wuzzy
glx22
milek7
Johannes E. Krause
Kuhnovic
Loïc Guilloux
embeddedt
Matt Kimber
Owen Rudge
Chris Stevens
gooball
Matt Kimber
Andy
J0anJosep